Prop Shafts & Diffs

This is a New Toyota Genuine Front Prop Shaft with Double Cardon Joint, LN107, LN111, LN130, RN106, RN110, RN130, YN130, KZN165, LN167, LN172, RZN169, RZN174, VZN167, VZN172 37140-35071

Lower Front Tailshaft Cover Toyota Hilux LN106 LN167 37713-35021 Genuine Toyota

Does not suit IFS front diff

Front Crown Wheel & Pinion Toyota Hilux VZN167 4.1 Ratio GENUINE 41201-80110

This part is the genuine Toyota collapsible spacer, between the front and rear pinion bearings on the front differential of Landcruiser and the rear differential of Prado, 4Runner and Hilux

Diff Pinion Seal suit All Toyota Landcruiser & Hilux to 2001, 90311-38066,  This is a new diff pinion seal to suit all models of Toyota Landcruiser.

Diff Centre Gasket Front or Rear for Toyota Hilux Prado Landcruiser 42181-60020

Diff Bearing Kit Toyota Hilux LN106, ADBK4H If vehicle has small carrier bearing may need DTDBK3H kit

High quality NOK brand seal manufactured in Japan

Harrop E-Locker 30 Spline Electronic Diff Lock to suit solid axle differentials for Toyota Landcruiser, Hilux, FJ Cruiser and Prado

This is a quality new aftermarket rear tailshaft or propshaft to suit Toyota Hilux LN167 from 8/1997 to 1/2005

Genuine Toyota side carrier bearing for front differential. This bearing supports the left or passenger side axle

This is new genuine Toyota, suits Hilux YN65, LN65, LN106, LN107, LN111, RN105, RN110, LN167, LN172, KZN165, RZN169, RZN174, KUN26 and GGN25 from 8/1983 onwards, all Landcruiser Prado KZJ95, RZJ95, VZJ95, KDJ120, KZJ120, GRJ120 and RZJ120 from 4/1996 - 8/2009, and the front axle housing of all Landcruiser  FZJ75, FZJ78, FZJ79, HZJ75, HZJ78, HZJ79, HDJ78, HDJ79, VDJ76, VDJ78, VDJ79, HZJFJ80, FZJ80, HDJ80, HZJ80, FZJ105 and HZJ105 from 1/1990 onwards.

This stud is 8mm diameter and 42mm long with 14mm of thread on either end and fits into the rear axle housing and retains the diff centre. Most applications use 2 of these and 8 x 90116-08329 studs which are 37mm long.

This part is a quality aftermarket rear tail shaft AKA prop shaft.

This part is a new genuine Toyota tail shaft flange

This part is an 18mm internal diameter engine sump plug fibre washer to suit virtually all Toyota engines to the early 1990's

Suit diffs with 23 spline x 38mm pinion shaft.

Drivetech 4X4 Rear Differential Bearing Kit for Toyota Hilux Landcruiser Prado VZN167 VZN172 GGN15 GGN25 KUN16 KUN26 TGN16 KZJ95 RZJ95 VZJ95 GRJ120 KDJ120 KZJ120 RZJ120 FZJ105 HZJ105 HZJ78 HZJ79 HDJ78 HDJ79 VDJ76 VDJ78 VDJ79 DT-DBK7L

Front or Rear Differential Pinion Bearing for Toyota Hilux

Differential Flange Lock Nut for Hilux 4Runner and Prado

Front Differential Carrier Bearing Thrust Washer for IFS Hilux and 4Runner

Genuine Toyota Rear Axle Bearing Retainer Case for Hilux RZN147 RZN149 RZN154 LN147 LN152 KUN16 KUN26 GGN15 GGN25 TGN16 42421-0K020 42421-34010