Prop Shafts & Diffs

Tail Shaft Rear Prop Shaft Hilux 4wd LN106 Rear of Rear 37110-35520  Suit Hilux with Leaf type front suspension

Front Prop Shaft suit Toyota Hilux 4wd LN106 LN65 37140-35030 Dont forget to grease the hidden grease nipple in the carden joint

Lower Front Tailshaft Cover Toyota Hilux LN106 LN167 37713-35021 Genuine Toyota

This part is the genuine Toyota collapsible spacer, between the front and rear pinion bearings on the front differential of Landcruiser and the rear differential of Prado, 4Runner and Hilux

The outer sealing surface of this seal is rubber - we also have the metal version - see link at bottom of product page

Bearing Pinion Differential Rear Inner Hilux and Landcruiser to 1988 97609-32307

Harrop E-Locker 30 Spline Electronic Diff Lock to suit solid axle differentials for Toyota Landcruiser, Hilux, FJ Cruiser and Prado

Also suits as transfer case breather for 40 Series Landcruiser and 4Runner / Surf with automatic transmission

Genuine Toyota side carrier bearing for front differential. This bearing supports the left or passenger side axle

This is new genuine Toyota, suits Hilux YN65, LN65, LN106, LN107, LN111, RN105, RN110, LN167, LN172, KZN165, RZN169, RZN174, KUN26 and GGN25 from 8/1983 onwards, all Landcruiser Prado KZJ95, RZJ95, VZJ95, KDJ120, KZJ120, GRJ120 and RZJ120 from 4/1996 - 8/2009, and the front axle housing of all Landcruiser  FZJ75, FZJ78, FZJ79, HZJ75, HZJ78, HZJ79, HDJ78, HDJ79, VDJ76, VDJ78, VDJ79, HZJFJ80, FZJ80, HDJ80, HZJ80, FZJ105 and HZJ105 from 1/1990 onwards.

This stud is 8mm diameter and 42mm long with 14mm of thread on either end and fits into the rear axle housing and retains the diff centre. Most applications use 2 of these and 8 x 90116-08329 studs which are 37mm long.

This part is a new universal joint yoke with a flat, square flange and the 2 universal joint loops

This part is an 18mm internal diameter engine sump plug fibre washer to suit virtually all Toyota engines to the early 1990's

New Koyo Toyota Hilux and Landcruiser Diff Outer Pinion Bearing. Suits LN46, RN46, YN65, LN65, LJ70, RJ70

The outer sealing surface of this seal is metal - we also have the rubber version - see link at bottom of product page

New Aftermarket Differential Carrier Bearing for Toyota Hilux and Landcruiser with Limited Slip Diff

Rear Differential Side Carrier Bearing for Toyota Hilux Prado Landcruiser

Front Differential Carrier Bearing Thrust Washer for IFS Hilux and 4Runner

Diff Transfer Gearbox Drain Filler Plug Kit Toyota Landcruiser and Hilux. Set of 2 Magnetic Drain And 2 Filler Plugs with 4 Washers.