4x4 Parts & 4WD Parts Sydney | All Four x 4 Spa... New Parts Suitable for Land Rover Suitable for Series 1, 2A & 3 Prop Shafts & Diffs
Prop Shafts & Diffs
|
Right Rear Axle Half Shaft for Land Rover Series 2 2a 3 10 Spline Rover Diff 591378 |
$99.00
Delivery weight: 2.9 kg
In stock |
|
|
|
|
Left Rear Axle Half Shaft for Land Rover Series 2 2a 3 10 Spline Rover Diff 591379 |
$154.00
Delivery weight: 3.9 kg
In stock |
|
|
|
|
Gear Differential Small Cross Shaft Pinion Land Rover Series II IIA III, 599944 |
$38.50
Delivery weight: 0.5 kg
In stock |
|
|
|
|
Bearing Differential Side Bearing Landrover Series III Defender
|
$75.00
Delivery weight: 0.7 kg
In stock |
|
|
|
|
Rear Tailshaft Flange Land Rover Series 2 2A 3 LWB Front of Rear or Rear of Rear 600656 |
$85.00
Delivery weight: 0.75 kg
Currently out of stock |
|
|
|
|
Rear Salisbury Diff Inner Pinion Bearing Landrover Series 3 & Defender 607180 |
$70.00
Delivery weight: 0.4 kg
In stock |
|
|
|
|
Quality Timken bearing |
$35.00
Delivery weight: 0.4 kg
In stock |
|
|
|
|
Rear Tailshaft Land Rover Series 2 2A 3 Rover Type Axle FRC4907 553001 |
$295.00
Delivery weight: 7 kg
In stock |
|
|
|
|
This is a zinc plated steel plug installed with 1/2 inch square drive |
$7.50
Delivery weight: 0.06 kg
In stock |
|
|
|
|
Rear Tailshaft or Propshaft to suit Land Rover Series 3 109 and Defender 200Tdi 110 |
$350.00
Delivery weight: 7.5 kg
In stock |
|
|
|
|
Tailshaft Boot suitable for Land Rover Series Range Rover Classic Discovery 1 Defender
|
$15.00
Delivery weight: 0.3 kg
In stock |
|
|
|
|
This is a new quality aftermarket gasket. Does not suit Range Rover P38 |
$4.00
Delivery weight: 0.1 kg
In stock |
|
|
|
|
Crown Wheel & Pinion Land Rover Series 3 Front & Rear, RTC2990 4.7 ratio, RTC2990 Not Series 3 V8. 47/10 or 4.7 Ratio |
$330.00
Delivery weight: 6 kg
Currently out of stock |
|
|
|
|
Rear Salisbury Diff Outer Pinion Bearing suits Landrover Series 3 & Defender, 607181. |
$77.00
Delivery weight: 0.5 kg
In stock |
|
|
|
|
Rear Axle Spindle Land Rover Series 2 2a and 3. This part is the left or right hand spindle for the rear axle |
$250.00
Delivery weight: 2 kg
Currently out of stock |
|
|
|
|
Front Tailshaft Land Rover Series 2 2A 3 4 Cylinder, STC1898 |
$330.00
Delivery weight: 6.5 kg
In stock |
|
|
|
|
This is a new Hardy Spicer brand universal joint |
$35.00
Delivery weight: 0.49 kg
In stock |
|
|
|
|
Piranha Diff Breather Kit RGDBK suits most model 4wd's |
$82.50
Delivery weight: 0.5 kg
In stock |
|
|
|
|
Diff Pinion Seal Suits Rover Type Diffs on Land Rover Series - Defender & County to 1992 - Range Rover Classic - OE Corteco - FRC4586A. |
$22.00
Delivery weight: 0.03 kg
In stock |
|
|
|
|
This part is a quality aftermarket 3/8" UNF self locking nyloc nut to suit the front or rear flange of the front or rear propshaft |
$1.65
Delivery weight: 0.01 kg
In stock |
|
|
|
|
Differential Flange suitable for Land Rover Series 2 2a 3 Range Rover Classic 236632
|
$55.00
Delivery weight: 0.54 kg
In stock |
|
|
|
|
This part is a new tapered roller bearing for the front or rear Rover differential side carrier |
$44.99
Delivery weight: 0.55 kg
In stock |
|
|
|
|
This is a 3/8 UNF x 1 1/8 inch Tailshaft Bolt |
$1.00
Delivery weight: 0.02 kg
In stock |
|
|
|
|
This part is a new oil seal for the rear differential drive pinion |
$27.50
Delivery weight: 0.06 kg
In stock |
|
|
|
|
This part is a new stake nut for the rear differential drive pinion |
$11.00
Delivery weight: 0.6 kg
In stock |
|
|
|
|
This is a quality Hardy Spicer brand universal joint measuring approx 82mm from end cap to end cap |
$33.00
Delivery weight: 0.5 kg
In stock |
|
|
|
|
This spacer is located between the flange and the bearing |
$20.00
Delivery weight: 0.06 kg
In stock |
|
|
|
|
1 litre bottle with integrated carry handle, 500mm long PVC hose and spout, nylon head and handle, nozzle drain back holder. |
$25.00
Delivery weight: 0.3 kg
In stock |
|
|
|
|
Collapsible Spacer for Pinion Shaft of Salisbury Diff |
$22.00
Delivery weight: 0.05 kg
In stock |
|
|
|
|
Various applications include diff gearbox fuel tank drain plug |
$3.30
Delivery weight: 0.05 kg
In stock |
|
|
|
|
Diff Sun Gear for Land Rover Series 1 Series 2 Series 2a Series 3 110 County Range Rover Classic Discovery 1 Rover Diff 599943 |
$38.50
Delivery weight: 0.43 kg
In stock |
|
|
|
|
Salisbury Diff Pinion Flange suitable for Land Rover Series County 110 Defender 607185 |
$85.00
Delivery weight: 0.9 kg
In stock |
|
|
|
|
New Land Rover Series spindle pin for planet gears in Rover type diff. Suits Series 1, 2 & early 3, built from 1948-1973 |
$27.50
Delivery weight: 0.2 kg
In stock |
|
|
|
|
Differential Planetary Gear Set Diff Gears suitable for LR Series 2a & 3 Genuine |
$275.00
Delivery weight: 1.3 kg
In stock |
|
|
|
|
Differential Pinion Seal for Land Rover Series 3 Defender Discovery Range Rover |
$10.00
Delivery weight: 0.04 kg
In stock |
|
|
|
|
This part is the tail or propellor shaft from the transfer case to the rear axle of all 4 Cylinder Land Rover Series 2 and 2a. |
$250.00
Delivery weight: 9 kg
Currently out of stock |
|
|
|
|
New genuine Land Rover Series 3 & Defender differential planetary gear set / planet gears. For Salisbury 4 pin type diffs |
$605.00
Delivery weight: 3.4 kg
In stock |
|
|
|
|
Salisbury Diff Pinion Flange Kit suitable for Land Rover Series County 110 Defender |
$134.50
Delivery weight: 1.05 kg
In stock |
|
|
|
Diff Bearing Kit for Land Rover Series 3, County 110, 130, Salisbury Diff Type, LRKIT66 |
$220.00
Delivery weight: 2 kg
In stock |
|
|
|
|
Part number 561590 Screw In Style Wheel Stud for Early Land Rover Series 1 Series 2 Series 2a 9/16 BSF |
$5.50
Delivery weight: 0.05 kg
In stock |
|
|
|
|
Universal Joint, UJ, Large, Heavy Duty, suitable for Landrover Series 2 & Series 3, 1962-1986. Suits Tail Shaft TVB100610, AYG4201, AYG4281. |
$85.00
Delivery weight: 0.6 kg
Currently out of stock |
|
|
|
|
Aftermarket Diff Pinion Seal, Front or Rear, Rover Type Diff, suitable for Series 1, 2, 2A, 3, 1950 to 1984, 110 1985 to 1992, Range Rover. |
$11.00
Delivery weight: 0.06 kg
In stock |
|
|
|
|
This is a high quality Hardy Spicer brand universal joint - suits the non greaseable / oil wetted front axle application only |
$49.50
Delivery weight: 0.49 kg
In stock |
|
|
|
|
Centre Differential Gear Kit for Land Rover Series 3 Stage 1 Range Rover Classic 110 County Perentie LT95 4 Speed Gearbox 608142 |
$165.00
Delivery weight: 0.83 kg
In stock |
|
|
|
|
Wheel Stud suitable for Land Rover County 110 vehicles with drum brakes built to 1992 only - FRC6137
|
$4.00
Delivery weight: 0.065 kg
In stock |
|
|
|
|
Quality aftermarket drive flange gasket suitable for all Land Rover Series from 1948 to 1984 |
$2.20
Delivery weight: 0.01 kg
In stock |
|
|
|
|
Aftermarket Wheel Bearing Hub Front or Rear, suitable for Land Rover Series 2A Suffix H, Series 3 SWB to June 1980, LWB to September 1980. |
$165.00
Delivery weight: 4.5 kg
Currently out of stock |
|
|
|
|
Hardy Spicer Universal Joint suitable for Land Rover Series 3 Stage 1 V8 109 LWB & Isuzu Perentie Ex Army 6x6 only |
$110.00
Delivery weight: 0.65 kg
In stock |
|
|
|
