Wiper Linkage Bush 2 Piece suitable for Landcruiser 60 Series
2 Piece Wiper Linkage Bush suitable for Landcruiser 60 Series FJ60 FJ62 HJ60 HJ61
This is a new 2 Piece Wiper Linkage Bush to suit Toyota Landcruiser 60 Series
Suits models FJ60 FJ62 HJ60 HJ61
This bush consists of two halves - a ring piece and a dome piece
There is one of these bushes on either end of the wiper link arm
See image gallery for drawing showing locations circled in red
It is usually only the motor end which fails, but it is a good idea to change both while its apart
This is a listing for 1 of these two piece bushes, if you want/need 2 please order qty x2 during checkout
This part is not available from Toyota - there is no Toyota part number
You will need to purchase the whole linkage assembly if you require genuine
See below for complete assembly and other associated parts
For those who are interested to use this bush in another application (we get a lot of calls.....)
Approx measurements:
Domed half:
ID 14.5mm
OD 18mm
Ring half:
OD on step (not overall): 20mm
ID 17.5mm
This is a high quality aftermarket part
ITEM SPECIFICS
| Brand: | Aftermarket |
| Manufacturer Part Number: | ZPP-729 |
| Our Part Number: | NGZPP729 |
| Condition: | New |
ADDITIONAL INFORMATION
- All Four x 4 Spares are an independent supplier of aftermarket, original equipment, and genuine parts. We are in no way related to genuine or original part manufacturers, distributors, or dealers. The warranty of any OEM genuine part is solely provided by All Four x 4 Spares
- This is an aftermarket product. Equivalent original equipment part number(s) are provided for reference purposes only.
All Four x 4 Spares will always undertake to provide adequate packaging to prevent damage to products during shipping. Our responsibility for any damage to freight ends when order has left our premises. We will consider replacement of damaged product however judgement will be at our discretion. If damage has occurred during shipping it would be advised to notify us and relevant courier.
- All exchanges / credits / refunds must be returned in saleable condition with packaging, accompanied by the original invoice for proof of purchase.
- All USED mechanical parts sold carry a 3 Month parts only warranty unless otherwise specified.
- All NEW mechanical parts sold carry a 12 Month / Unlimited kilometre parts only warranty unless otherwise specified.
- All electrical parts or components sold carry a 30 Day parts only warranty unless otherwise specified.
- All Four x 4 Warranty does not cover - Labour expenses, freight or towing costs, oil leaks, broken gears, consequential damage, loss of income or any other loss or expense.
- All Four x 4 will not be liable for any repairs or work carried out, without prior approval from All Four x 4.
- Warranty is void if parts have been tampered with, modified or dismantled.
- Goods cannot be returned if they have been specially ordered or vehicle cut section.
- Goods not required must be returned within 14 Days of invoice date at purchaser’s expense. Goods will be accepted only at the Management’s discretion. If accepted for return, such goods will be subject to a 15% handling charge.
- Good will not be accepted for return if they have been fitted, unless proven faulty.
- Warranty is void for components used in performance / modified vehicles or parts / competition / off road / race applications.
- All fitment information is for vehicles released in Australia, unless specified otherwise.
6 Reviews
-
100% linkage product fits my 1986 mazda t3500 bus.
Works prfect...fits great..thank you very much.
-
Quality is good but not a straight fit for 24 Volt EU version.
Got these today and had a bit of a struggle fitting them on my 1983 HJ60 24 Volt.They did not clip right on so i had to file down the thickness of the wiper rods, also the rods on my HJ60 dont have the hole for the small pin and the rods are probably a bit beefier than the Asian, AU and US 12 V models.When i finally got them to click on the rod they where very hard to pop on the balls of the wiper motor and the wiper end, they just split apart when they popped on so i almost gave up.But then i remembered that i had a pair of these that i bought on eBay that also didn't fit because of a shallow dome-half.Turned out that the dome-half from Allfourx4 and the ring-half from eBay was a perfect fit, probably not even necessary to file the rods with this combination.Would love to see someone make these for the 24 V version and i will gladly donate my old original bushings for science.
-
Good, great service
Had trouble until I read about putting it together first then popping it on. Still had trouble getting it to clip together, found bush slightly too thin for wiper arm, had to file my wiper arm down to make it thinner so it would clip together properly then all was good.
-
Excellent AAA+++
Easy to install just clip together grease and pop back to linkage.
-
good
Prompt service.
-
10/10
Very easy to install on arm, then add a little grease to linkage and it easly pops on.