Suitable for 80 Series
Keeping an older 4WD going strong comes down to having the right parts on hand. We stock just about everything you could need in parts suitable for 80 Series Landcruiser, genuine and aftermarket, from the engine and cooling system to brakes, driveline, suspension, body and electrics. Can't see it listed? We can often source hard-to-find parts and order them in on request.
Read MoreRead Less
Parts suitable for Landcruiser FJ80, FZJ80, HZJ80 and HDJ80, from engine to electrics
- Engine and servicing: Filters, gaskets, seals, timing parts and mounts to keep the motor sealed, serviced and running smoothly. A genuine air filter stops fine dust getting into the engine, which matters on dry, corrugated roads.
- Cooling and heating: Radiators, hoses, water pumps, thermostats, fans and heater taps that keep temperatures in check when it's working hard. A cracked expansion tank can lose coolant onto the ground instead of returning it to the system, so a new radiator expansion tank is worth fitting at the first sign of a crack.
- Fuel system parts: Fuel filters, primer pumps, injector parts, solenoids and sender units for clean fuel and an accurate gauge. If the fuel door doesn't pop open when you pull the release, a fuel flap spring could be the fix.
- Clutch and brakes: Master cylinders, calipers, rotors, handbrake shoes and cables, clutch kits and slave cylinders for a vehicle that stops and shifts the way it should. The Terrain Tamer modified handbrake shoe strut sets the shoes slightly further apart, so the handbrake needs less pull and feels more precise.
- Gearbox and transfer case: Seals, bearings, bushes, mounts and lever boots that keep oil in and shifts clean. A leaking output seal lets oil escape onto the tailshaft, and a rear transfer case output seal is a good place to start.
- Tailshafts and diffs: Tailshafts, uni joints, pinion seals, diff gaskets, crown wheel and pinion sets and diff lock parts to keep drive getting to all four wheels. A genuine diff breather lets the diff breathe as it heats and cools, so pressure doesn't push oil out past the seals.
- Axle and steering parts: Wheel bearings, hub and swivel parts, CV joints, tie rod ends and wheel studs for steering that stays tight and true. NOK front inner axle seals keep diff oil in the diff instead of letting it work its way out along the axle housing.
- Suspension bushes and springs: Control arm, radius arm and panhard rod bushes, sway bar parts, shock bushes and spring spacers for a ride that stays planted. Worn trailing arm bushes let the rear axle shift under load, and a rear lower control arm bush may be all it needs to firm things back up.
- Body and interior: Door and window rubbers, body mounts, handles, hinges, mirrors and clips to keep the cab quiet, dry and looking tidy. Perished body mounts let the body move and rattle on the chassis, and an 18-piece body mount kit saves you hunting for each mount separately.
- Electrical and lighting: Lamps and indicators, switches, alternators, starter motors and washer pumps to keep everything charging, starting and lighting up. An ignition and door lock barrel set gives you matched barrels and keys, so the same keys work the ignition and both front doors.
With over 40 years in the 4WD game, we know these vehicles inside out. Order online with express shipping on most items to Australia and New Zealand, or pick up in store at Kotara (Newcastle NSW) if you’re nearby.
-
Engine
-
Cooling
-
Fuel
-
Clutch & Brake
-
Gearbox & Transfer
-
Prop Shafts & Diffs
-
Axle & Steering
-
Suspension
-
Body
-
Electrical
Additional Information
How to find the right part suitable for your specific Toyota Landcruiser 80 Series
Engine
Engine parts follow the engine, so start with your engine code. Parts suitable for the 80 Series Landcruiser FJ80 fit its 4.0 litre 3F-E petrol engine, while parts suitable for the FZJ80 with the 1FZ-FE fit the larger 4.5 litre petrol that replaced it in 1992. On the diesel side, parts suitable for the HZJ80 fit the 1HZ. The turbo diesel changed in 1995, so parts suitable for the HDJ80 with the 1HD-T often differ from those suitable for the HDJ80 with the 24-valve 1HD-FT.
Body type
The rear opens with either barn doors or a lift-up tailgate, and parts such as the number plate light, washer nozzle, badge and seals differ between the two. Mirrors, weatherstrips and switches can also change with the trim level, so check the trim named in the listing.
Brakes and driveline
Brake master cylinders and rear tailshafts differ between vehicles with and without ABS. Tailshafts, radiators and gearbox mounts can also differ between automatics and manuals.
Model updates
Plenty of parts changed in 1992, when the larger petrol engine arrived, including sway bar bushes and handbrake parts. Heater taps and some dash parts changed again around 1995. Each listing gives the build dates it covers, so match them to your vehicle's build date.
For other models, browse new parts suitable for Landcruiser.
Need help?
Still not sure it's the right part, or can't find what you're after? Give us a call or send us an enquiry with your Rego or VIN, and we’ll make sure you get the right part first time.