Start with a canopy. Upgrade to a compact, 2-sleeper, or family camper without replacing the base unit. Workshop-fitted at Kotara, NSW for customers from Newcastle, Sydney and across NSW.
Start with a canopy. Upgrade to a compact, 2-sleeper, or family camper without replacing the base unit. Workshop-fitted at Kotara, NSW for customers from Newcastle, Sydney and across NSW.
The ModCAP is not a canopy. It's not a camper. It's a modular platform, starting as a premium flat-roof canopy and upgrading into a compact camper, full 2-sleeper, or family camper sleeping four adults. The base unit stays on the vehicle. The tent module swaps in when you need it. Buy the Canopy today. Fit the Family Camper in three years. Same base, bigger adventure.
The ModCAP Canopy has a 150kg dynamic roof load and rear entry but unlike a standard canopy, it's already future-ready for a camper module. No new purchase, no reinstall.
A Canopy Camper is one integrated unit. The ModCAP lets you build in stages, start simple, add the camper module when you're ready. The platform doesn't limit you.
Dual cab, extra cab, LandCruiser 79 Series, and American full-size trucks (short and long bed). We confirm vehicle-specific fitment at enquiry stage.
Dail utility with full upgrade potential - 110Kg double cab
The entry point. A premium flat-roof canopy with rear door entry, gas-assisted side access doors, fully welded sealed aluminium, and the highest dynamic roof load in the range at 150kg. Use it daily trade, touring, storage. When you're ready to upgrade, the flat roof swaps for a camper module without touching the base.
Built for
Tradies, tourers, and anyone who wants a premium canopy today with a clear upgrade path to a camper in the future. The only canopy you'll ever need to buy.
| Platform | Height | Weight |
|---|---|---|
| Double cab | 730mm | 110kg |
| Extra cab | 730mm | 120kg |
| Short bed (US) | 840mm | 130kg |
| Long bed (US) | 840mm | 145kg |
| 79 Series DC | 960mm | 140kg |
Leanest camper in the range · Zero overhang · 160kg double cab
The leanest, most agile camper in the ModCAP range. Adds just 70mm of height over the flat roof with zero overhang, keeping the vehicle's rear profile tight and trail-friendly. Internal access from canopy to sleeping area, split mattress system (most stays inside when closed), and the largest exterior roof packing area of any lightweight ModCAP camper.
Built for
Weight-conscious tourers, weekend adventurers, and anyone who needs a garage-friendly, trail-friendly camper without the payload hit of the larger modules.
Key features:
Specs:
Full overlanding setup · 3.07m² sleeping area · 220–250kg
The full ModCAP camper module. Full internal standing height, seamless canopy-to-tent access, 3.07m² sleeping area on a 70mm high-density mattress, and 150kg dynamic roof load. The most popular ModCAP configuration for couples and solo tourers on extended trips, outback runs, cross-country overlanding, extended bush camps.
Built for
Serious tourers doing extended trips. The 2-Sleeper with Drive-Off Base is the go-to setup for overlanders who need the ute free at camp while keeping the camper set up.
Key features:
| Platform | Height | Weight |
|---|---|---|
| Double cab | 945mm | 220kg |
| Extra cab | 945mm | 225kg |
| Short bed (US) | 1055mm | 240kg |
| Long bed (US) | 1055mm | 250kg |
| 79 Series DC | 1175mm | 245kg |
4.8m² · Sleeps 4 adults · Skylight · Dual USB/Type-C/cig outlets · 250–280kg
The top of the ModCAP range. A side-opening design creates 4.8m² of sleeping space four adults, four pillows, two duvets when closed. The Family Camper adds features not found on other modules: a 315gsm heat-reflective flysheet, marine-grade PVC skylight, 2 × 12 LED dual-colour lights with individual switches, and 2 × USB + 4 × Type-C + 2 × cigarette lighter outlets. One vehicle. Four people. No trailer.
Built for
Families and groups who want a proper campsite from one vehicle, school holidays, the big lap, long weekends without the towing complexity of a caravan.
Key features, Family only:
Plus all 2-Sleeper features.
| Platform | Height | Weight |
|---|---|---|
| Double cab | 955mm | 250kg |
| Extra cab | 955mm | 255kg |
| Short bed (US) | 1065mm | 270kg |
| Long bed (US) | 1065mm | 280kg |
| 79 Series DC | 1185mm | 275kg |
Remove the whole unit in minutes · 80kg double cab · Legs sold separately
The Drive-Off Base converts your ModCAP or Canopy Camper into a self-contained slide-off unit. Fixed install during the week, remove the whole camper in minutes at camp without uninstalling from the tub. Integrated T-slot mounting rails for fridges, drawers, and water tanks. Vinyl flooring and four side storage pockets.
Built for
Tourers who want to park the camper at camp and use the ute independently without the complexity of reinstalling the ModCAP from the tub mounting each time.
⚠ Legs must be purchased separately. We work through the right configuration at enquiry.
Specs:
The ModCAP platform works with Alu-Cab's full accessory range. Fitted in our Kotara workshop at install or as later upgrades.
🍳 Living & Kitchen
📦 Storage & MOLLE
💧 Water
🌿 Comfort & Protection
We supply and workshop-fit the full Alu-Cab ModCAP range from our Kotara, NSW workshop. Customers travel from across NSW for proper fitment and build planning — not just a drop-off.
The ModCAP mounts directly to your tub. Fitment matters, a poorly mounted unit on a corrugated track is a problem we see regularly from improper installs. We do it once, properly.
Locations we serve
NSW-wide, customers travel for proper fitment
subscription success