NATIONWIDE SHIPPING FOR AUS & NZ
Vehicle Safety Test Reports · Kotara, Newcastle

Safe-T-Stop safety test reports

Real numbers on how your 4×4 brakes, steers and rides, not just an opinion. Our Safe-T-Stop plate tester measures your brakes, wheel alignment and suspension, and weighs your vehicle, then gives you a clear, date and time stamped printed report with photo proof. Ideal before you buy, after a suspension or GVM change, or simply for peace of mind.

Brakesbalance & performance
Suspensionrebound & shock check
Alignmentfront & rear axles
Weighbridgecorner & axle weights
Measured results, not guesswork
Printed report with photo proof
4×4 specialists since 1985
Issues found? We fix them on-site
What it is

An honest, measured report on how your vehicle really performs

A Safe-T-Stop safety test report gives you an accurate, easy to understand condition report on your brakes, wheel alignment and suspension. Your vehicle is driven onto the Safe-T-Stop plate tester and the machine measures how it actually behaves, so you get real data rather than a quick visual once-over.

You walk away with a printed report, complete with the readings, the date and time, and photo proof that the test was carried out on your vehicle. It’s the difference between “it feels fine” and knowing, with the numbers in front of you, exactly how your 4×4 stops, steers and rides.

This is part of our wider inspections and reports. It is not a pink slip or eSafety check, for your registration inspection see our eSafety inspection page.

What the report covers

Five checks, one clear report

The Safe-T-Stop tester runs your vehicle through a full safety diagnostic and prints the results. Here’s what it measures.

01

Brake performance

Detects dangerous side-to-side and front-to-rear brake imbalances, the kind that can cause a vehicle to pull or lose control under heavy braking.

02

Wheel alignment & drag

Checks drag and alignment on both the front and rear axles, so your tyres roll true, wear evenly and perform the way they should.

03

Suspension & shocks

Measures ride quality by testing the rebound and oscillation of the suspension, from firm to soft, and confirms your shock absorbers are doing their job.

04

Weighbridge

Integrated corner and axle weight scales, so you can see how your 4×4 sits, useful for loaded touring rigs and vehicles with a GVM upgrade.

05

Printed report

An accurate, easy to read printout of your vehicle’s performance, date and time stamped, with photo proof the test was done on your vehicle.

How it works

The Safe-T-Stop test, explained

Three tests and a weighbridge, all from the one machine, all captured in your report. Watch how each one works.

Brake testing & report

Balance, performance & stopping

Your vehicle is driven onto the plate tester, which measures the braking force at each wheel. It picks up dangerous side-to-side and front-to-rear imbalances that can make a vehicle pull or lose control in an emergency stop, long before you’d feel them on the road. The result tells you whether your 4×4 will pull up straight and in the shortest possible distance, and if something’s off, we can put it right on-site.

Alignment testing & report

Drag on the front & rear axles

The tester checks the drag and alignment on both the front and rear axles. Misalignment scrubs your tyres, shortens their life and quietly costs you fuel through extra rolling resistance. By measuring the drag on each axle, the report shows whether your wheels are tracking true, so you get even wear and maximum tyre performance. Important on a heavier 4×4, and after any suspension, lift or steering work.

Suspension testing & report

Rebound, oscillation & shocks

Ride quality is measured by testing the rebound and oscillation of the suspension, from firm to soft. This confirms your shock absorbers are actually controlling the vehicle rather than just holding it up, which matters for grip, braking and comfort, especially on a loaded touring setup. Worn shocks show up in the numbers here before they show up as a bouncy, unsettled ride or uneven tyre wear.

Plus a weighbridge

See how your 4×4 sits

The Safe-T-Stop also integrates corner and axle weight scales, so it doubles as a weighbridge. You can see how weight is distributed across your vehicle, genuinely useful on a loaded touring rig or one that’s had a GVM upgrade. Knowing your corner and axle weights helps you set a 4×4 up to sit and handle properly.

Why get one

The benefits of a Safe-T-Stop check

It’s a small check that tells you a lot, and can save you money and trouble down the track.

01

Stop straight, stop short

Know your vehicle will pull up straight and in the shortest possible distance in an emergency, with balanced brakes across every wheel.

02

Longer tyre life

Correct alignment and even wear mean your tyres last longer, so you replace them less often and spend less over time.

03

Better fuel economy

Minimising drag from misalignment reduces rolling resistance, which helps your fuel consumption every time you drive.

04

Shocks you can trust

Confirm your suspension and shock absorbers are working properly, for better grip, braking and comfort loaded or unloaded.

05

Catch problems early

Spot brake, suspension or tyre issues before they become a breakdown or a bigger repair bill, especially before a big trip.

06

Proof in writing

A date and time stamped report with photos, ideal when buying or selling a vehicle, or keeping records for a fleet.

Example Safe-T-Stop safety test report showing brake, alignment and suspension results🔍 Click to enlarge
Your printed report

Clear results you can act on

You don’t just get a thumbs up. You get an accurate, easy to read report of exactly how your vehicle performed, so you can see where it stands and what, if anything, needs attention. And because we’re a full 4×4 workshop, if the report flags something we can quote it and sort it on-site.

  • Brake, alignment and suspension results in plain figures
  • Date and time stamped
  • Photo proof the test was done on your vehicle
  • Ideal for your records, buying, selling or a fleet
When it’s worth it

Good times to get a safety test report

A Safe-T-Stop report is quick and independent, which makes it handy in a few common situations.

Before you buy

Thinking of buying a used 4×4? A measured report on the brakes, alignment and suspension tells you what you’re really getting. Pairs perfectly with a pre-purchase inspection.

After suspension or GVM work

Fitted a lift, new shocks or a GVM upgrade? Confirm the alignment, ride and corner weights are right for the new setup.

Before a big trip

Heading bush or on a big lap? Know your brakes, shocks and alignment are up to it before you leave the black-top, not a long way from help.

Selling or fleet records

Selling a vehicle, or keeping a fleet on top of safety? A date and time stamped report with photos is independent proof you can hand over.

How it works

Getting tested is simple

Quick, clear and no jargon, and if it needs work, you’re already in the right place.

1

Book it in

Book online or call (02) 4041 4003 and let us know your vehicle. We’ll fit you in at Kotara.

2

We test it

Your 4×4 goes onto the Safe-T-Stop plate tester for brake, alignment, suspension and weight testing.

3

You get the report

We hand you a clear, printed report with the readings, date and time, and photo proof, and talk you through it.

4

Fix if needed

If the report flags anything, we quote it and, as a full workshop, we can sort the repairs on-site.

What our customers say

Trusted across the Hunter

5.0
★★★★★
Rated on Google Business Profile
★★★★★

“Got my Nissan Patrol sorted here. A full rundown with a quote beforehand, plus a detailed breakdown of the car’s issues and the next steps. Amazing customer service and really friendly. 10/10.”

A
Avocado K.Nissan Patrol
★★★★★

“My Isuzu was playing up and I was desperate to get it fixed before Christmas. Alex managed to squeeze in a look and a quick repair on the spot. The professionalism was second to none.”

D
David G.Isuzu D-Max
★★★★★

“Great experience with this business doing a major service on my 2017 Ford Ranger. Full rundown with a quote beforehand and a clear breakdown of what was next. Cheers guys.”

J
James D.Ford Ranger
★★★★★

“From my very first call with Mandy, to picking my car up, I had 10/10 service. I can’t thank the staff enough for being transparent and utterly professional. Thank you!”

H
HeidiNewcastle
Common questions

Safety test report FAQs

What is a Safe-T-Stop safety test report?
It’s an accurate, easy to understand condition report on your brakes, wheel alignment and suspension, measured on the Safe-T-Stop plate tester. You get a printed report with the readings, date and time stamped, and photo proof the test was done on your vehicle.
What does the test actually check?
Four things from the one machine: brake performance and balance (side-to-side and front-to-rear), wheel alignment and drag on both axles, suspension rebound and shock condition, and corner and axle weights via the built-in weighbridge.
Is this the same as a pink slip or eSafety check?
No. A Safe-T-Stop report is an independent performance report, not a registration inspection. If you need a pink slip or eSafety check for your rego, see our inspections and reports page. Many customers do both while the vehicle is with us.
How long does the test take?
The test itself is quick. Book ahead and we’ll have you in and out with your printed report without a long wait. If the report flags repairs you’d like done, we’ll quote those separately.
Do I get something in writing?
Yes. You get a clear, printed report showing your vehicle’s performance, date and time stamped, with photo proof. It’s ideal for your own records, for buying or selling, or for keeping a fleet on top of safety.
When should I get a safety test report?
Before buying a used 4×4, after fitting suspension, a lift or a GVM upgrade, before a big trip, or any time you want an honest, measured check of how your vehicle stops, steers and rides.
If the report finds a problem, can you fix it?
Yes. We’re a full 4×4 workshop, so if the report turns up a brake, alignment, suspension or tyre issue we can quote it and carry out the repairs on-site, then you’re sorted.
How much does a safety test report cost?
Give us a call on (02) 4041 4003 and we’ll confirm the current price and book you in. If you’d like any repairs done off the back of the report, we’ll quote those up-front too.

Know how your 4WD really stops, steers and rides

Book a Safe-T-Stop safety test report and get the numbers in writing, with photo proof. And if anything needs attention, you’re already in a workshop that can fix it.

Driven by passion. Backed by experience. Built for adventure.
Find us

Drop in at Kotara

Centrally based in Kotara, easy to reach from across Newcastle, Lake Macquarie, Maitland and the wider Hunter.

All Four x 4 Service Centre

10 McDougall St, Kotara NSW 2289, Newcastle

Phone: (02) 4041 4003

Opening Hours: Mon - Fri 7:30am - 5:00pm

Get directions →
×

subscription success