Intervolt In-Vehicle DC - DC Pro Battery Charger 25 Amp - DCC1225ACK-RP
Intervolt In-Vehicle DC - DC Pro Battery Charger 25 Amp - DCC1225ACK-RP
The DCC Pro was developed for the purpose of charging and maintaining any auxiliary battery in an installation where the starting battery is used as the supply source. It has been designed for use in 4WDs, RVs, buses, coaches, caravans, campers or any vehicle with a 12VDC electrical system.
The DCC Pro is a standalone power conversion device. It will manage a variety of different battery types according to their specific charging requirements. As no modi cation to the vehicle's original wiring is required this ensures the manufacturer's electrical system is not compromised in any way.
The DCC Pro is a highly innovative product with many unique features. It has the flexibility to adapt to almost any vehicle, old or new, simple or complex with or without an ECU controlled electrical system and even allows the operator monitor the charging status from the comfort of the cabin!
Features
The best in-class performance for a charger of this size
The DCC Pro is a true 25 Amp charger, that is, 25 Amps at 50 deg C all day, every day. In addition the DCC Pro will continue charging at reduced output right up to 85 deg C!
Remote monitoring from the comfort of the driving seat
The DCC Pro is kitted with an interactive, in-cabin display for remote monitoring of the auxiliary charging status from both main and solar power charging sources.
Solar ready no need for a separate regulator or relay
The DCC Pro is a complete MPPT solar charge controller capable of handling 250 Watts of power with up to 30% greater efficiency than a standard PWM regulator.
Specifications
Input Voltage
-Main: 9 17 VDC,
-Solar Input: 27 VOC max. (open circuit no load)
Solar Power 250 Watts nominal (300 Watts peak)
Continuous Rating 25 Amps @ 50 deg C
Current Draw
-Charging Device: Including LED indicator 10mA
-Remote Display: With backlight off: 10mA max,
-With backlight on: 30mA max
Boost Voltage
-Standard Lead Acid: 14.4 VDC Nominal
-Absorbed Glass Mat: 14.6 VDC Nominal
-Gelified Electrolyte: 14.2 VDC Nominal
-Lead Calcium: 14.8 VDC Nominal
Float Voltage 13.2 VDC Nominal
Electrical Protection
-Thermal overload shutdown auto reset
-Electrical overload shutdown auto reset
-Under voltage disconnect auto re-connect
-Over voltage disconnect auto re-connect
-Reverse polarity protection of main terminals
Environmental Protection
-Charging Device: IP67 (internal components only)
-Remote Display: IP40 (not dust or water resistant)
Operating Temperature -20 deg C to +85 deg C
Operating Humidity Up to 98%
Charging Device Materials
-Heatsink: E-Coated ADC-3 die cast aluminium
-Blue Plastics: Temperature resistant PC/ABS alloy
-Black Plastics: 15% glass reinforced PBT
-Transparent Plastics: Temperature resistant PMMA
Remote Display Materials
-Dark Grey Plastics: Temperature resistant PC/ABS alloy
-Transparent Plastics: Temperature resistant PMMA
Terminal Material Tin plated brass
Terminal Fasteners 304 stainless steel
Conformity AS/NZS CISPR 11:2004 for EMC
Dimensions
-Charging Device: 112 x 112 x 75mm (including terminal cover)
-Remote Display: 60 x 36 x 59mm (including mounting bracket)
Weight
-Charging Device: 690 grams
-Remote Display: 55 grams
ITEM SPECIFICS
| Brand: | Intervolt |
| Manufacturer Part Number: | DCC1225ACK-RP |
| Our Part Number: | NGDCC1225ACK-RP |
| Condition: | New |
Ask a question about this item
All Four x 4 Spares will always undertake to provide adequate packaging to prevent damage to products during shipping. Our responsibility for any damage to freight ends when order has left our premises. We will consider replacement of damaged product however judgement will be at our discretion. If damage has occurred during shipping it would be advised to notify us and relevant courier.
- All exchanges / credits / refunds must be returned in saleable condition with packaging, accompanied by the original invoice for proof of purchase.
- All USED mechanical parts sold carry a 3 Month parts only warranty unless otherwise specified.
- All NEW mechanical parts sold carry a 12 Month / Unlimited kilometre parts only warranty unless otherwise specified.
- All electrical parts or components sold carry a 30 Day parts only warranty unless otherwise specified.
- All Four x 4 Warranty does not cover - Labour expenses, freight or towing costs, oil leaks, broken gears, consequential damage, loss of income or any other loss or expense.
- All Four x 4 will not be liable for any repairs or work carried out, without prior approval from All Four x 4.
- Warranty is void if parts have been tampered with, modified or dismantled.
- Goods cannot be returned if they have been specially ordered or vehicle cut section.
- Goods not required must be returned within 14 Days of invoice date at purchaser’s expense. Goods will be accepted only at the Management’s discretion. If accepted for return, such goods will be subject to a 15% handling charge.
- Good will not be accepted for return if they have been fitted, unless proven faulty.
- Warranty is void for components used in performance / modified vehicles or parts / competition / off road / race applications.
- All fitment information is for vehicles released in Australia, unless specified otherwise.