Darche Eclipse 270 Degree Awning with Walls 1 2 3 - T050801743KIT
Darche Eclipse 270 Degree Awning with Walls 1 2 3
This is a new quality Darche brand Eclipse 270 Degree Awning with all three optional annex walls
With over two years in development, the Eclipse 270 Degree Awning is a class leading design.
Designed as a freestanding unit to ease set up and pack down only, the Eclipse 270 Degree Awning is easily set up by one person.
This awning is mounted on the left hand side of the vehicle.
If you require a right hand mount version (drivers side in Australia) they are available.
Please contact us for further information.
Hinged from both ends, the Eclipse 270 Degree Awning spans along the full length of the vehicle as well as the rear, offering additional undercover area compared to other general market offerings.
This provides approximately 11.5m2 of covered area.
With walls erected up to 20.5m2 of sheltered area can be achieved.
Each wall can be set up as a wind and weather break or as an upright awning extension, allowing the Eclipse 270 Degree Awning to extend further up to 4.2m in total, featuring 2x pivoting alloy telescopic poles which are neatly stowed along the rafter when packing away.
Wall Features & Specifications
- The walls can be set up as a wind and weather break, or as an awning extension.
- With walls fitted and anchored down, approx. 20.5m2 of coverage can be achieved depending on the height of the vehicle.
- 1300mm wide zippered door on centre panel.
- Zips separating walls and wall panels allow for various setup configurations.
- 260gsm poly/cotton grid ripstop canvas.
- 1500mm PU waterproofing with HF seam sealing.
- Pegs and guy ropes included.
Dimensions Wall 1: 6100mm L x 2250mm H (Bottom length) EC27W1,T050801745A, T050801743A,
Dimensions Wall 2: 5200mm L x 2250mm H (Bottom length) EC27W2, T050801745B, T050801743B,
Dimensions Wall 3: 2600mm L x 2250mm H (Bottom length) EC27W3, T050801745C, T050801743C,
CONSTRUCTION --- The awning and walls are constructed using a hard-wearing proofed 260gsm poly cotton ripstop canvas. The frame is a Aluminium box extrusion with steel hardware. The transit cover is constructed using laminated 600gsm PVC
AREA OF SHELTER --- The awning alone covers 11.5m2. With walls fitted, the set up covers approximately 20.5m2 depending on height of vehicle
ADDITIONAL POLES INCLUDED --- 3x pivoting alloy telescopic poles are included and purposely fitted under awning arms for easy access and stowing. Each rafter has a purpose drilled hole for additional supplied spigot poles
UNIQUE POINT OF DIFFERENCE --- The Eclipse 270° Awning hinges from two sides, and also has a class leading larger coverage area as the front span runs along the front of the vehicle
MOUNTING ORIENTATION & ROOF RACK COMPATIBILITY --- Available in Australian passenger side or Australian driver side mount. Mounting brackets are included and will accommodate most commercially available steel basket and flat rack set ups
ADDITIONAL WALL USAGE --- With the use of Darche's Telescopic Alloy Poles 90-230cm (sold separately), both front walls are designed to be used as additional extendible awnings. Walls available seperately
FREE-STANDING FUNCTIONALITY --- It is designed to be a free-stander to aid in set up and pack down only, however we recommend that it is pegged down at all times. It has a large surface area, meaning sudden wind gusts could become hazardous. The Darche Eclipse 270° Awning has been designed for general camping use under normal conditions. Always ensure all guy ropes are anchored correctly. It may be necessary to re-adjust guy ropes and pegs at times to maintain the structural integrity of the awning. Note: To avoid chances of personal injury and or property damage, Darche highly recommends the Eclipse 270° Awning should NOT be erected during windy conditions. Damage caused by wind and/or adverse weather will not be covered under warranty
ONE-PERSON SETUP --- The Eclipse 270° Awning is designed as a simple 1 person set up and pack down. Inclement weather may require the assistance of another person
WATER RUN-OFF --- Included guy ropes need to be fixed between rafters to create a water run off valley
WARRANTY --- 2 Year factory warranty
The Eclipse 270 Degree Awning will quickly become a favourite must-have for all serious tourers and campers alike
Part numbers for reference: T050801743 EC27W1 T050801745A EC27W2 T050801745B EC27W3 T050801745C
Bundle Information
This item consists of multiple components, click 'Read More' below for details.
Read More
Items included in bundle:
- Darche Eclipse 270 Degree Awning Eclipse 270 Gen 2 Passenger side | Our Part Number: NGT050801743 | 1 piece(s)
- Darche Eclipse 270 Degree Awning Wall 3 - T050801743C | Our Part Number: NGT050801743C | 1 piece(s)
- Darche Eclipse 270 Degree Awning Wall 2 - T050801743B | Our Part Number: NGT050801743B | 1 piece(s)
- Darche Eclipse 270 Degree Awning Wall 1- T050801743A | Our Part Number: NGT050801743A | 1 piece(s)
ITEM SPECIFICS
| Brand: | Darche |
| Manufacturer Part Number: | T050801743KIT |
| Our Part Number: | NGT050801743KIT |
| Condition: | New |
Ask a question about this item
All Four x 4 Spares will always undertake to provide adequate packaging to prevent damage to products during shipping. Our responsibility for any damage to freight ends when order has left our premises. We will consider replacement of damaged product however judgement will be at our discretion. If damage has occurred during shipping it would be advised to notify us and relevant courier.
- All exchanges / credits / refunds must be returned in saleable condition with packaging, accompanied by the original invoice for proof of purchase.
- All USED mechanical parts sold carry a 3 Month parts only warranty unless otherwise specified.
- All NEW mechanical parts sold carry a 12 Month / Unlimited kilometre parts only warranty unless otherwise specified.
- All electrical parts or components sold carry a 30 Day parts only warranty unless otherwise specified.
- All Four x 4 Warranty does not cover - Labour expenses, freight or towing costs, oil leaks, broken gears, consequential damage, loss of income or any other loss or expense.
- All Four x 4 will not be liable for any repairs or work carried out, without prior approval from All Four x 4.
- Warranty is void if parts have been tampered with, modified or dismantled.
- Goods cannot be returned if they have been specially ordered or vehicle cut section.
- Goods not required must be returned within 14 Days of invoice date at purchaser’s expense. Goods will be accepted only at the Management’s discretion. If accepted for return, such goods will be subject to a 15% handling charge.
- Good will not be accepted for return if they have been fitted, unless proven faulty.
- Warranty is void for components used in performance / modified vehicles or parts / competition / off road / race applications.
- All fitment information is for vehicles released in Australia, unless specified otherwise.