Front or Rear CV Shaft Nut suitable for Discovery 3 4 Range Rover Sport Evoque Freelander Defender
This is a new quality Aftermarket branded CV Shaft Outer Nut
Suitable for:
- Land Rover Freelander 2, L359, fitted to the rear only, built from 2006 to 2014 runout (see note below)
- Discovery 3 and Discovery 4, L319, fitted to the front or rear, built from 2005 to 2016 runout (see note below)
- Range Rover Sport, L320, fitted to the front or rear, built from 2005 to 2013 runout (see note below)
- Range Rover, L405, fitted to the front or rear, built from 2013 to 2022 runout.
- Range Rover Evoque, L318, L551, fitted to the front or rear, built from 2012 onwards.
- Land Rover New Defender, L663, fitted to the front or rear, built from 2020 onwards.
This is the Outer CV Nut that screws onto the end of the CV Joint.
NOTE: There are two different types of CV Nut. This is the later castle type nut, with a M24 x 2.00mm pitched thread. used when the original factory CV Shafts have been replaced.
If the CV Shafts have been changed, at any point, it is more than likely, you have the new castle type nut.
The early standard style nut had a M24 x 1.5mm pitched thread, which was used on the original factory fitted CV Shafts.
Please check prior to ordering.
ITEM SPECIFICS
| Brand: | Aftermarket |
| Manufacturer Part Number: | LR024151A |
| Our Part Number: | NGLR024151 |
| Condition: | New |
ADDITIONAL INFORMATION
- All Four x 4 Spares are an independent supplier of aftermarket, original equipment, and genuine parts. We are in no way related to genuine or original part manufacturers, distributors, or dealers. The warranty of any OEM genuine part is solely provided by All Four x 4 Spares
- This is an aftermarket product. Equivalent original equipment part number(s) are provided for reference purposes only.
All Four x 4 Spares will always undertake to provide adequate packaging to prevent damage to products during shipping. Our responsibility for any damage to freight ends when order has left our premises. We will consider replacement of damaged product however judgement will be at our discretion. If damage has occurred during shipping it would be advised to notify us and relevant courier.
- All exchanges / credits / refunds must be returned in saleable condition with packaging, accompanied by the original invoice for proof of purchase.
- All USED mechanical parts sold carry a 3 Month parts only warranty unless otherwise specified.
- All NEW mechanical parts sold carry a 12 Month / Unlimited kilometre parts only warranty unless otherwise specified.
- All electrical parts or components sold carry a 30 Day parts only warranty unless otherwise specified.
- All Four x 4 Warranty does not cover - Labour expenses, freight or towing costs, oil leaks, broken gears, consequential damage, loss of income or any other loss or expense.
- All Four x 4 will not be liable for any repairs or work carried out, without prior approval from All Four x 4.
- Warranty is void if parts have been tampered with, modified or dismantled.
- Goods cannot be returned if they have been specially ordered or vehicle cut section.
- Goods not required must be returned within 14 Days of invoice date at purchaser’s expense. Goods will be accepted only at the Management’s discretion. If accepted for return, such goods will be subject to a 15% handling charge.
- Good will not be accepted for return if they have been fitted, unless proven faulty.
- Warranty is void for components used in performance / modified vehicles or parts / competition / off road / race applications.
- All fitment information is for vehicles released in Australia, unless specified otherwise.