Oricom DTX4300 Ultra Compact Micro Size 5 watt UHF CB Radio
Oricom DTX4300 Ultra Compact Micro Size 5 watt UHF CB Radio
The DTX Series of UHF CB Radios are the first and best of their breed and have become an essential communication tool for on and off the road.
The Oricom DTX4300 Micro Size 5-Watt UHF CB radio is a well-crafted unit, packing a real punch for its ultra-compact size, and is one of the smallest fixed mount UHF CB radios on the Australian market.
The unit has a powerful 5-Watt operation, 80 channels with 38 CTCSS and DCS Codes, 3 memory groups and smart fast scanning, ensuring you're always connected.
Features:
- Ultra compact micro size
- 96 colour LCD backlit display
- Flip LCD function
- Over voltage alert function
- Heavy duty microphone
- 3 memory groups
- Smart fast scanning (priority/
- group memory/ group tone scan)
- Back light brightness (4 pre-set levels)
- Rotary volume/channel and squelch control
- Duplex
- 38 CTCSS & DCS codes
- Diecast metal chassis
- Auto power off (off/1h/2h/4h)
- 3.5mm external jack (for optional external speaker)
- Designed and engineered in Korea
- Requires antenna (not supplied)
Specifications:
GENERAL
Compliance AS/NZS 4365:2011
Frequency Range TX/RX 476.425 - 477.4125 MHz
Number of TX/RX Channels 80 UHF CB Channels (75 voice)
Channel Spacing TX/RX 12.5KHz
Operating modes Simplex, Repeater TX offset
(+750KHz)
Scanning Speed 50 msec per channel
Antenna Impedance 50 Ohms
Operating Volts nominal 13.8VDC
Operating Volts Range 10 to 16VDC
Over Voltage Protection Diode and Voltage
regulator system
Over Current Protection 2 AMP fuse
Reverse Polarity Protection Shunt diode
Frequency stability +/- 5 ppm
TRANSMITTER
RF Output Power 5 watts max
Modulation F3E(FM)
Maximum deviation 2.5KHz
Spurious Emissions < -30dBm
TX Audio pre-emphasis +6dB/Octave from 300Hz
to 3KHz
Current consumption 1.7 AMP with 50 ohm
during TX antenna termination
RECEIVER
Circuit Type Dual conversion
super heterodyne
Intermediate Frequencies 1st IF : 21.4MHz / 2nd IF : 450KHz for Main RX
Maximum usable sensitivity -123dBm for 12dB SINAD
un-weighted
Audio output power > 2 Watts at 8 ohm load
RX Audio de-emphasis +6dB/Octave from 300Hz
to 3KHz
Signal to Noise Ratio > 40dB
Conducted Spurious Emission > -57dBm
MECHANICAL
Dimensions (H) X (W) X (D) 22.5 X 100 X 76mm
Weight 210g transceiver only
Part number for reference: DTX4300
ITEM SPECIFICS
| Brand: | Oricom |
| Manufacturer Part Number: | DTX4300 |
| Our Part Number: | NGDTX4300 |
| Condition: | New |
Ask a question about this item
All Four x 4 Spares will always undertake to provide adequate packaging to prevent damage to products during shipping. Our responsibility for any damage to freight ends when order has left our premises. We will consider replacement of damaged product however judgement will be at our discretion. If damage has occurred during shipping it would be advised to notify us and relevant courier.
- All exchanges / credits / refunds must be returned in saleable condition with packaging, accompanied by the original invoice for proof of purchase.
- All USED mechanical parts sold carry a 3 Month parts only warranty unless otherwise specified.
- All NEW mechanical parts sold carry a 12 Month / Unlimited kilometre parts only warranty unless otherwise specified.
- All electrical parts or components sold carry a 30 Day parts only warranty unless otherwise specified.
- All Four x 4 Warranty does not cover - Labour expenses, freight or towing costs, oil leaks, broken gears, consequential damage, loss of income or any other loss or expense.
- All Four x 4 will not be liable for any repairs or work carried out, without prior approval from All Four x 4.
- Warranty is void if parts have been tampered with, modified or dismantled.
- Goods cannot be returned if they have been specially ordered or vehicle cut section.
- Goods not required must be returned within 14 Days of invoice date at purchaser’s expense. Goods will be accepted only at the Management’s discretion. If accepted for return, such goods will be subject to a 15% handling charge.
- Good will not be accepted for return if they have been fitted, unless proven faulty.
- Warranty is void for components used in performance / modified vehicles or parts / competition / off road / race applications.
- All fitment information is for vehicles released in Australia, unless specified otherwise.