Power Box PB-200 - Portable 12V 200A Lithium Power System with Black Face Plate
This is a new quality Power Box branded Portable 12V 200A Lithium Power System.
Power Box has designed the PB-200 specifically with the 4WD touring enthusiast in mind. The PB-200 is the ultimate in portable power systems and provides plenty of capacity to cater for all of your 12V accessory needs.
It's coupled with a Redarc 1225D charging platform along with a Powertech 150AH lithium battery. It also includes a Victron smart shunt, a 200A isolator, and a plethora of outlets.
The PB-200 is also designed to be suitable for canopy installation if so required. This has been catered for with 5 rocker switches mounted to the face plate which allow for the easy control of accessories such as lighting, 12V ovens and even compressors.
For maximum freedom in control, there is also a 12 pin flush mount Deutsch plug on the rear which allows for the included switch harness to be installed. This Deutsch plug is isolated via a relay when the plug is disconnected ensuring that there are no live terminals when the switch harness is not in use.
The switch harness is supplied with a 1.5m tail and wiring diagram to allow for switches to be wired in wherever desired on the vehicle.
We also stock Power Box's range of mounting trays and wiring harnesses for use with the PB-200.
Weighing 32kg and measuring up at 266mm wide x 680mm deep x 345mm high, the PB-200 is the largest system in Power Box's range. If you require the best of the best for your power needs, look no further.
Features & Benefits:
- 200ah Powertech lithium battery.
- Redarc 1225D – DC to DC charger with solar input.
- Battery monitoring system.
- 5 x face panel mounted rocker switches for external items up 10a.
- Quick connect external switch harness for seamless integration.
- 175amp inverter supply anderson plug for inverter up to 2000w.
- 200amp main isolator.
- Solar Input – 50 amp anderson plug.
- Vehicle Input - 50 amp anderson plug.
- 4 x 30amp 12v power supply - 50 amp anderson plug.
- 2 x 12v socket outlet.
- 4 x USB charging ports.
- 10 x Fuse less resettable circuit protection.
- Custom front switch fascia.
- Anti slip SeaDek to top storage area.
- Mounting tray compatible.
- Charge cable kit compatible.
FAQ's:
Is the PB-200 waterproof or does it have an IP rating?
No, the PB-200 is not waterproof. However, due to the design and components used, minor splashing or moisture should not cause any issues.
How do I tell the state of charge on my PB-200?
All Power Box models are fitted with a Victron battery monitor, which can be accessed using the VictronConnect app.
The VictronConnect app is available for iOS, Android, Windows & Mac OS.
Download VictronConnect Here.
Click to Read More
Can I run an inverter off the PB-200?
Both the PB-200 and PB-150 have a dedicated Anderson plug connector to allow for the easy connection of an inverter if needed.
Can I run a solar blanket to charge the PB-200?
Yes, the PB-200 comes standard with a Red Anderson plug for solar input that runs through the Redarc 1225D charging platform, so there is no need for additional solar power regulators.
Will the PB-200 drain my vehicle starting battery?
No, the low voltage cut off feature provided by the Redarc 1225D charging platform will prevent the PB-200 from draining your starting battery.
What is the warranty on the PB-200?
The PB-200 has various warranties for each of its components. In the event of an issue or concern, please contact All Four x 4 Spares for assistance.
- Redarc Charger: 2 Years
- Powertech Battery: 3 Years
- Victron Battery Monitor: 5 Years
- Battery Case: 3 Years
- All Switches, Outlets & Other Components: 12 Months
Will the PB-200 drain while not in use?
No, the PB-200 includes a battery isolator switch on the front which will cut off draw from the battery when switched to the 'OFF' position.
Can you replace the battery?
Yes, the PB-200 utilises a Powertech battery that can be replaced if needed.
What happens if a fuse blows on a circuit?
The PB-200 is built with resettable circuit breakers. In the event that a fuse does blow, the circuit breakers can be simply pushed back in and reset. However, if it blows again please ensure that the device you are plugging in is not faulty.
Note: We also stock the PB-200 by Power Box with Green and Red face plates.
Please see the Alternative Items below for more.
ITEM SPECIFICS
| Brand: | Power Box |
| Manufacturer Part Number: | PB-200 BLACK |
| Our Part Number: | NGPB200BLACK |
| Condition: | New |
Ask a question about this item
All Four x 4 Spares will always undertake to provide adequate packaging to prevent damage to products during shipping. Our responsibility for any damage to freight ends when order has left our premises. We will consider replacement of damaged product however judgement will be at our discretion. If damage has occurred during shipping it would be advised to notify us and relevant courier.
- All exchanges / credits / refunds must be returned in saleable condition with packaging, accompanied by the original invoice for proof of purchase.
- All USED mechanical parts sold carry a 3 Month parts only warranty unless otherwise specified.
- All NEW mechanical parts sold carry a 12 Month / Unlimited kilometre parts only warranty unless otherwise specified.
- All electrical parts or components sold carry a 30 Day parts only warranty unless otherwise specified.
- All Four x 4 Warranty does not cover - Labour expenses, freight or towing costs, oil leaks, broken gears, consequential damage, loss of income or any other loss or expense.
- All Four x 4 will not be liable for any repairs or work carried out, without prior approval from All Four x 4.
- Warranty is void if parts have been tampered with, modified or dismantled.
- Goods cannot be returned if they have been specially ordered or vehicle cut section.
- Goods not required must be returned within 14 Days of invoice date at purchaser’s expense. Goods will be accepted only at the Management’s discretion. If accepted for return, such goods will be subject to a 15% handling charge.
- Good will not be accepted for return if they have been fitted, unless proven faulty.
- Warranty is void for components used in performance / modified vehicles or parts / competition / off road / race applications.
- All fitment information is for vehicles released in Australia, unless specified otherwise.