Saber Ezy Glide Recovery Ring & 18K Sheath Soft Shackle Kit SBR-12BRRK1
Saber Ezy Glide Recovery Ring & 18K Sheath Soft Shackle Kit SBR-12BRRK1
This is a new quality Saber brand Ezy Glide Recovery Ring & 18K Sheath Soft Shackle Kit
The Ezy-Glide Recovery Ring is light, strong and engineered to exceed expectations.
This kit includes one 18,000KG Soft Shackle with Protective Sheath bundled with the recovery ring.
In the end, not all rings are created equal and we believe this engineered solution is truly a market leader.
Description:
Welcome to the NEW Saber Offroad Ezy-Glide Recovery Ring.
When size and weight are serious factors in recovery kits, we are proud to offer this heavy-duty, small and lightweight alternative to a snatch block.
This recovery ring weighs less than 1kg (2.2lbs), and has a total diameter of only 143mm, with an internal diameter of 96mm.
Based on this size, it is almost a 1/4 of the weight of a similar rated snatch block.
We suggest you combine the ring with either our Bound Soft Shackle or Sheath Soft Shackle, as both have been extensively tested and show the best results to minimise frictional load.
We deliberately are not the smallest ring on the market, but as we outline below, this ring was specially designed in consultation with winch rope fibre manufacturers to reduce wear and fatigue on the ropes being used in conjunction with the ring.
The Ezy-Glide Recovery ring must ONLY be used with soft shackles and synthetic winch ropes.
What makes the Saber Offroad Ezy-Glide Recovery Ring a true market leader?
Here are the key advantages:
Engineered to Maximise Capacity & Minimise Rope Wear.
When we looked at the design of the ring, we wanted to not only make sure it works well, it is light, small, but it must also protect the winch rope from fatigue leading to damage.
We know that any tight bend in a rope under load decreases its strength and can cause damage, potentially leading to premature failure.
In discussions with our winch line fibre manufacturers, we were advised that an 8:1 ratio for internal channel diameter (not outer diameter) is recommended.
With our internal channel of 96mm (outer 143mm), we have a product ideal for winch ropes up to 12mm (1/2″)
Rope Diameter: 6mm. Recovery Ring Internal Minimum Suggested Diameter: 48mm.
Rope Diameter: 8mm. Recovery Ring Internal Minimum Suggested Diameter: 64mm.
Rope Diameter: 10mm. Recovery Ring Internal Minimum Suggested Diameter: 80mm.
Rope Diameter: 12mm. Recovery Ring Internal Minimum Suggested Diameter: 96mm.
This ring is one of only a few on the market with an internal channel design suitable for synthetic winch ropes of 10mm or above.
The channel profile is specifically designed to support the rope and reduce the flattening of the fibres under load.
Free Form Central Core.
Unlike the majority of rings on the market, we have designed a free form central core to better support soft shackles and reduce friction in the system.
Heavy-Duty Design.
Designed with T6 Billet Aluminium, this ring will withstand forces in excess of the listed Working Load Limit (W.L.L) of 12,500KG.
Australian Designed & Tested.
This ring has been extensively tested both mechanically (in only Australian NATA accredited facilities) and in the real-world to make sure it will perform when you need it most.
High-Grade Custom Bag.
Our custom-designed padded bag also includes a convenient clip to attach to existing recovery kits.
Part number for reference: SBR-12KKIT2, SBR12KKIT2
ITEM SPECIFICS
| Brand: | Saber |
| Manufacturer Part Number: | SBR-12BRRK1 |
| Our Part Number: | NGSBR12BRRK1 |
| Condition: | New |
Ask a question about this item
All Four x 4 Spares will always undertake to provide adequate packaging to prevent damage to products during shipping. Our responsibility for any damage to freight ends when order has left our premises. We will consider replacement of damaged product however judgement will be at our discretion. If damage has occurred during shipping it would be advised to notify us and relevant courier.
- All exchanges / credits / refunds must be returned in saleable condition with packaging, accompanied by the original invoice for proof of purchase.
- All USED mechanical parts sold carry a 3 Month parts only warranty unless otherwise specified.
- All NEW mechanical parts sold carry a 12 Month / Unlimited kilometre parts only warranty unless otherwise specified.
- All electrical parts or components sold carry a 30 Day parts only warranty unless otherwise specified.
- All Four x 4 Warranty does not cover - Labour expenses, freight or towing costs, oil leaks, broken gears, consequential damage, loss of income or any other loss or expense.
- All Four x 4 will not be liable for any repairs or work carried out, without prior approval from All Four x 4.
- Warranty is void if parts have been tampered with, modified or dismantled.
- Goods cannot be returned if they have been specially ordered or vehicle cut section.
- Goods not required must be returned within 14 Days of invoice date at purchaser’s expense. Goods will be accepted only at the Management’s discretion. If accepted for return, such goods will be subject to a 15% handling charge.
- Good will not be accepted for return if they have been fitted, unless proven faulty.
- Warranty is void for components used in performance / modified vehicles or parts / competition / off road / race applications.
- All fitment information is for vehicles released in Australia, unless specified otherwise.