Safari Snorkel suitable for Hilux KUN26 2011 to 2015 1KD 3.0L 4 Cyl Turbo Diesel
Safari Snorkel for Hilux KUN26 1KD-FTV 3.0L 4 Cyl Turbo Diesel.
The SS122HF Toyota Hilux KUN26 (10/2011 on) 4x4 Snorkel is designed to deliver a huge volume of the coolest and cleanest air possible into the stock air cleaner assembly of the 3.0L D4D Diesel 1KD-FTV engine
KUN26 Hilux owners can enjoy the benefits that are delivered by a snorkel system that not only exceeds the air flow requirements of the 3.0L D4D engine available throughout the life of the vehicle, but also one that satisfies the huge mass air flow demands of the Safari Intercooler enhanced Multivalve Turbo Diesel
Close attention to the internal cross sectional profile and area, air velocity and flow path through each and every point along the entire length of the snorkel system ensures that the greatest air flow is achieved
This of course also applies to components that are not visible
For example in order to achieve the optimum air flow within the inner guard area of the Hilux, a special molded smooth bore tough wall hose was engineered to closely couple the snorkel body to the standard air intake assembly
The result is maximum engine performance and the best possible fuel economy
Huge air flow is but one aspect of the ultimate in snorkel design
The Safari air ram is designed to perform two very important roles
The most obvious is to funnel cool clean air into the snorkel body - but just as importantly, the Safari air ram acts as a highly efficient water separator to remove rain water from the incoming air stream - thus ensuring safe engine operation through even the most torrential tropical storms
In addition, the detachable Safari air ram can be rotated to any position
This means great peace of mind for those who plan to travel in cold or high altitude conditions where heavy snow falls are anticipated
By rotating the air ram to face away from the prevailing wind/direction of motion, the air ram delivers additional protection from the choking effects of snow build-up inside the air intake
The Safari Snorkel body is manufactured to the highest standards in durable, UV stable, cross linked polyethylene material
In addition, the substantial material wall thickness delivers huge physical strength to ensure that the snorkel breezes through the toughest off-road conditions on the planet
The Safari Snorkel system is supplied as a complete and comprehensive system that includes every nut, bolt and bracket required for installation - right from robust zero-corrosion stainless steel studs, self-locking nyloc nuts and large diameter anodized body washers through to the tough plastic A-pillar inserts
V-Spec snorkels are identified with a HF at the end of the part number. These snorkels are manufactured in Australia from Safaris own industrial specification UV stabilized polyethylene material
A life time warranty is included for peace of mind when it comes to your vehicle
ITEM SPECIFICS
| Brand: | Safari 4x4 |
| Manufacturer Part Number: | SS122HF |
| Our Part Number: | NGSS122HF |
| Condition: | New |
ADDITIONAL INFORMATION
- All Four x 4 Spares are an independent supplier of aftermarket, original equipment, and genuine parts. We are in no way related to genuine or original part manufacturers, distributors, or dealers. The warranty of any OEM genuine part is solely provided by All Four x 4 Spares
- This is an aftermarket product. Equivalent original equipment part number(s) are provided for reference purposes only.
All Four x 4 Spares will always undertake to provide adequate packaging to prevent damage to products during shipping. Our responsibility for any damage to freight ends when order has left our premises. We will consider replacement of damaged product however judgement will be at our discretion. If damage has occurred during shipping it would be advised to notify us and relevant courier.
- All exchanges / credits / refunds must be returned in saleable condition with packaging, accompanied by the original invoice for proof of purchase.
- All USED mechanical parts sold carry a 3 Month parts only warranty unless otherwise specified.
- All NEW mechanical parts sold carry a 12 Month / Unlimited kilometre parts only warranty unless otherwise specified.
- All electrical parts or components sold carry a 30 Day parts only warranty unless otherwise specified.
- All Four x 4 Warranty does not cover - Labour expenses, freight or towing costs, oil leaks, broken gears, consequential damage, loss of income or any other loss or expense.
- All Four x 4 will not be liable for any repairs or work carried out, without prior approval from All Four x 4.
- Warranty is void if parts have been tampered with, modified or dismantled.
- Goods cannot be returned if they have been specially ordered or vehicle cut section.
- Goods not required must be returned within 14 Days of invoice date at purchaser’s expense. Goods will be accepted only at the Management’s discretion. If accepted for return, such goods will be subject to a 15% handling charge.
- Good will not be accepted for return if they have been fitted, unless proven faulty.
- Warranty is void for components used in performance / modified vehicles or parts / competition / off road / race applications.
- All fitment information is for vehicles released in Australia, unless specified otherwise.