Safari Snorkel suitable for Hilux LN167 LN172 5L 3.0L 4 Cyl Diesel SS145R
Safari Snorkel for Hilux LN167 LN172 5L 3.0L 4 Cyl Diesel.
The SS145R Toyota Hilux LN167 LN172 Safari snorkel is tough and stylish and has been designed to deliver a huge volume of the coolest and cleanest air possible into the stock air cleaner assembly of the 5L 3.0L 4 Cyl diesel engine
With the variety of engine options available in the Toyota Hilux, Safari took the decision to design a snorkel system specifically for the gutsy 3.0L diesel engine powered Hilux
By doing so, Safari was successful in delivering an advanced snorkel system that exactly matched the specific requirements of this vehicle/engine combination
Close attention to the internal cross sectional profile and area, air velocity and flow path through each and every point along the entire length of the snorkel system ensures that the greatest air flow is achieved.
This of course applies to components that are not visible
For example in order to achieve the optimum air flow and the maximum user convenience (for other under-hood accessories), a special thick-walled rubber hose was engineered to closely couple the snorkel body to the standard air intake assembly
This specialized hose is specifically constructed for positive sealing at each end and is exceptionally stable to eliminate any possibility of restriction through collapse when under suction - and super tough to withstand high levels of under-hood vibration as experienced on rough corrugated outback tracks
The result is maximum engine performance and bullet-proof durability
Huge air flow is but one aspect of the ultimate in snorkel design
The Safari air ram is designed to perform two very important roles
The most obvious is to funnel cool clean air into the snorkel body - but just as importantly, the Safari air ram acts as a highly efficient water separator to remove rain water from the incoming air stream - thus ensuring safe engine operation through even the most torrential tropical storms
In addition, the detachable Safari air ram can be rotated to any position
This means great peace of mind for those who plan to travel in cold or high altitude conditions where heavy snow falls are anticipated
By rotating the air ram to face away from the prevailing wind/direction of motion, the air ram delivers additional protection from the choking effects of snow build-up inside the air intake
The genuine Safari Snorkel body and air ram are manufactured to the highest standards in durable, UV stable, cross linked polyethylene material
In addition, the substantial material wall thickness delivers huge physical strength to ensure that the snorkel breezes through the toughest off-road conditions on the planet
The Safari Snorkel system is supplied as a complete and comprehensive system that includes every nut, bolt and bracket required for installation - right from robust zero-corrosion stainless steel studs, self-locking nyloc nuts and large diameter anodized body washers through to the tough plastic A-pillar inserts
An accurately marked template is also provided to ensure that the installation of the snorkel body to panel work is as precise as possible
V-Spec snorkels are identified with a HF at the end of the part number
These snorkels are manufactured in Australia from Safaris own industrial specification UV stabilized polyethylene material
A life time warranty is included for peace of mind when it comes to your vehicle
ITEM SPECIFICS
| Brand: | Safari 4x4 |
| Manufacturer Part Number: | SS145R |
| Our Part Number: | NGSS145R |
| Condition: | New |
ADDITIONAL INFORMATION
- All Four x 4 Spares are an independent supplier of aftermarket, original equipment, and genuine parts. We are in no way related to genuine or original part manufacturers, distributors, or dealers. The warranty of any OEM genuine part is solely provided by All Four x 4 Spares
- This is an aftermarket product. Equivalent original equipment part number(s) are provided for reference purposes only.
All Four x 4 Spares will always undertake to provide adequate packaging to prevent damage to products during shipping. Our responsibility for any damage to freight ends when order has left our premises. We will consider replacement of damaged product however judgement will be at our discretion. If damage has occurred during shipping it would be advised to notify us and relevant courier.
- All exchanges / credits / refunds must be returned in saleable condition with packaging, accompanied by the original invoice for proof of purchase.
- All USED mechanical parts sold carry a 3 Month parts only warranty unless otherwise specified.
- All NEW mechanical parts sold carry a 12 Month / Unlimited kilometre parts only warranty unless otherwise specified.
- All electrical parts or components sold carry a 30 Day parts only warranty unless otherwise specified.
- All Four x 4 Warranty does not cover - Labour expenses, freight or towing costs, oil leaks, broken gears, consequential damage, loss of income or any other loss or expense.
- All Four x 4 will not be liable for any repairs or work carried out, without prior approval from All Four x 4.
- Warranty is void if parts have been tampered with, modified or dismantled.
- Goods cannot be returned if they have been specially ordered or vehicle cut section.
- Goods not required must be returned within 14 Days of invoice date at purchaser’s expense. Goods will be accepted only at the Management’s discretion. If accepted for return, such goods will be subject to a 15% handling charge.
- Good will not be accepted for return if they have been fitted, unless proven faulty.
- Warranty is void for components used in performance / modified vehicles or parts / competition / off road / race applications.
- All fitment information is for vehicles released in Australia, unless specified otherwise.