null
SUBSCRIBE TO OUR NEWSLETTER TO ENTER THE DRAW TO WIN 1 OF 2 $250 GIFT CARDS*
NATIONWIDE SHIPPING FOR AUS & NZ

Safari Snorkel suitable for Landcruiser V8 200 Series 4.5L Diesel 4.7L Petrol

No reviews yet Write a Review

Brand: Safari 4x4

Our Part Number: NGSS87HF
$460.00
$367.99 inc. GST
Was $460.00
You save $92.01

Safari Snorkel suitable for Landcruiser V8 200 Series 4.5L Diesel 4.7L Petrol

No reviews yet Write a Review

Brand: Safari 4x4

Our Part Number: NGSS87HF
$460.00
$367.99 inc. GST
Was $460.00
You save $92.01

Safari Snorkel suitable for Landcruiser V8 200 Series 4.5L Diesel 4.7L Petrol

The Safari SS87-HF snorkel is tough and stylish and has been designed to deliver a huge volume of the coolest and cleanest air possible into the stock air cleaner assembly of the mighty 200 Series Land Cruiser. With the variety of engine options available in the 200 Series, Safari took the decision to design a snorkel system that not only exceeded the air flow requirements of each engine configuration, but also satisfied the huge mass air flow demands of the powerful Dtronic enhanced intercooled twin turbo diesel V8 engine.

Close attention to the internal cross sectional profile and area, air velocity and flow path through each and every point along the entire length of the snorkel system ensures that the greatest air flow is achieved. The result is maximum engine performance and the best possible fuel economy. This of course applies to components that are not visible.

A short straight shot of air through the tough precision formed rubber joiner hose delivers air from the snorkel body directly into the stock air intake assembly. The result is maximum engine performance and the best possible fuel economy. In fact, the engine bay layout essentially remains unchanged for the maximum compatibility with other aftermarket accessories such as dual batteries etc.

This ensures that the 200 LandCruiser owner has the most flexibility possible in terms of installing additional under-hood accessories. Huge air flow is but one aspect of the ultimate in snorkel design. The Safari air ram is designed to perform two very important roles.

The most obvious is to funnel cool clean air into the snorkel body - but just as importantly, the Safari air ram acts as a highly efficient water separator to remove rain water from the incoming air stream - thus ensuring safe engine operation through even the most torrential tropical storms. In addition, the detachable Safari air ram can be rotated to any position.

This means great peace of mind for those who plan to travel in cold or high altitude conditions where heavy snow falls are anticipated. By rotating the air ram to face away from the prevailing wind/direction of motion, the air ram delivers additional protection from the choking effects of snow build-up inside the air intake.

The genuine Safari Snorkel body and air ram is manufactured to the highest standards in durable, UV stable, cross linked polyethylene material. In addition, the substantial material wall thickness delivers huge physical strength to ensure that the snorkel breezes through the toughest off-road conditions on the planet.

Plastic ain't plastic. Click here to learn about the importance of choosing a snorkel product manufactured from the correct material compound. Not unlike the UV rating of sunblock creams on humans; the UV number applied to Plastics being exposed to the sun's UV rays, indicates the level of protection and consequently, life of the snorkel. In order to deliver the 20 plus year life expected of Safari Snorkels, a specially compounded material is used to result in a rating of at least UV20.

This contrasts markedly to other brand snorkels manufactured outside Australia. Even when these foreign snorkels use material sourced from quality major international suppliers, (such as Mobil Exxon), the finished product typically has a UV rating of only 8 - far short of the UV20 rating required for long snorkel service life.

The Safari Snorkel system is supplied as a complete and comprehensive system that includes every nut, bolt and bracket required for installation - right from robust zero-corrosion stainless steel studs, self-locking nyloc nuts and large diameter anodized body washers through to the tough plastic A-pillar inserts.

 

ITEM SPECIFICS

Brand: Safari 4x4
Manufacturer Part Number: SS87HF
Our Part Number: NGSS87HF
Condition: New

 

ADDITIONAL INFORMATION
  • All Four x 4 Spares are an independent supplier of aftermarket, original equipment, and genuine parts. We are in no way related to genuine or original part manufacturers, distributors, or dealers. The warranty of any OEM genuine part is solely provided by All Four x 4 Spares
  • This is an aftermarket product. Equivalent original equipment part number(s) are provided for reference purposes only.
Ask a question about this item

All Four x 4 Spares will always undertake to provide adequate packaging to prevent damage to products during shipping. Our responsibility for any damage to freight ends when order has left our premises. We will consider replacement of damaged product however judgement will be at our discretion. If damage has occurred during shipping it would be advised to notify us and relevant courier.

  1. All exchanges / credits / refunds must be returned in saleable condition with packaging, accompanied by the original invoice for proof of purchase.
  2. All USED mechanical parts sold carry a 3 Month parts only warranty unless otherwise specified.
  3. All NEW mechanical parts sold carry a 12 Month / Unlimited kilometre parts only warranty unless otherwise specified.
  4. All electrical parts or components sold carry a 30 Day parts only warranty unless otherwise specified.
  5. All Four x 4 Warranty does not cover - Labour expenses, freight or towing costs, oil leaks, broken gears, consequential damage, loss of income or any other loss or expense.
  6. All Four x 4 will not be liable for any repairs or work carried out, without prior approval from All Four x 4.
  7. Warranty is void if parts have been tampered with, modified or dismantled.
  8. Goods cannot be returned if they have been specially ordered or vehicle cut section.
  9. Goods not required must be returned within 14 Days of invoice date at purchaser’s expense. Goods will be accepted only at the Management’s discretion. If accepted for return, such goods will be subject to a 15% handling charge.
  10. Good will not be accepted for return if they have been fitted, unless proven faulty.
  11. Warranty is void for components used in performance / modified vehicles or parts / competition / off road / race applications.
  12. All fitment information is for vehicles released in Australia, unless specified otherwise.
<div id="short-description"> <p>All Four x 4 Offroad are proud distributors of <strong>Safari 4x4 Snorkels</strong></p> </div> <div id="long-description"> <p><img style="width: 240px; height: 140px;" src="https://cdn11.bigcommerce.com/s-7rkpjyhhds/images/stencil/original/image-manager/safari-snorkels2.png?t=1687996918" alt="Safari Snorkels" /></p> <div style="position: relative; width: 100%; overflow: hidden; padding-top: 56.25%; margin-bottom: 1.5rem;"><iframe style="position: absolute; top: 0; left: 0; width: 100%; height: 100%; border: 0;" title="YouTube video player" src="https://www.youtube.com/embed/FKh8M2UwGec" width="300" height="150" allowfullscreen="allowfullscreen"></iframe></div> </div>

subscription success