Superior Weld on Front Panhard Brace suitable for Landcruiser 80 Series late models & 105 Series
This is a new quality Superior Engineering branded Weld on Front Panhard Brace.
Suitable for:
- Toyota Landcruiser 80 Series, FJ80, FZJ80, HZJ80, HDJ80, built from 01/1990 to 12/1997 runout.
- Toyota Landcruiser 100, 105 Series, FZJ105, HZJ105, built from 01/1998 to 07/2007 runout.
The Upper Chassis Mount on the Toyota Landcruiser 80 and 105 Series would have been of sufficient strength back in the day, but with many years and constant hard knocks from our less than perfect roads can fatigue the steel causing a potential for failure.
This Weld in Panhard Brace is the perfect solution to strengthen the Chassis End Panhard Mount which may have become weakened over time.
Supplied raw, and ready to weld, it comes with Full Instructions and Fitting Kit.
This Kit is suitable for late Model Landcruiser 80 Series only and all Landcruiser 105 Series.
To help identify whether your 80 Series vehicle has the correct chassis or not for this kit, please refer to the below image.
The key identifying feature is the circular hole, located forward of the steering box itself.
ITEM SPECIFICS
| Brand: | Superior Engineering |
| Manufacturer Part Number: | SUP-PANBRACE-LCR80 |
| Our Part Number: | NGSUPPANBRACELCR80 |
| Cross-Reference Numbers: | SUPPANBRACELCR80 |
| Condition: | New |
ADDITIONAL INFORMATION
- All Four x 4 Spares are an independent supplier of aftermarket, original equipment, and genuine parts. We are in no way related to genuine or original part manufacturers, distributors, or dealers. The warranty of any OEM genuine part is solely provided by All Four x 4 Spares
- This is an aftermarket product. Equivalent original equipment part number(s) are provided for reference purposes only.
All Four x 4 Spares will always undertake to provide adequate packaging to prevent damage to products during shipping. Our responsibility for any damage to freight ends when order has left our premises. We will consider replacement of damaged product however judgement will be at our discretion. If damage has occurred during shipping it would be advised to notify us and relevant courier.
- All exchanges / credits / refunds must be returned in saleable condition with packaging, accompanied by the original invoice for proof of purchase.
- All USED mechanical parts sold carry a 3 Month parts only warranty unless otherwise specified.
- All NEW mechanical parts sold carry a 12 Month / Unlimited kilometre parts only warranty unless otherwise specified.
- All electrical parts or components sold carry a 30 Day parts only warranty unless otherwise specified.
- All Four x 4 Warranty does not cover - Labour expenses, freight or towing costs, oil leaks, broken gears, consequential damage, loss of income or any other loss or expense.
- All Four x 4 will not be liable for any repairs or work carried out, without prior approval from All Four x 4.
- Warranty is void if parts have been tampered with, modified or dismantled.
- Goods cannot be returned if they have been specially ordered or vehicle cut section.
- Goods not required must be returned within 14 Days of invoice date at purchaser’s expense. Goods will be accepted only at the Management’s discretion. If accepted for return, such goods will be subject to a 15% handling charge.
- Good will not be accepted for return if they have been fitted, unless proven faulty.
- Warranty is void for components used in performance / modified vehicles or parts / competition / off road / race applications.
- All fitment information is for vehicles released in Australia, unless specified otherwise.