Terrain Tamer Upper Control Arms suitable for Ranger PX I II BT50 TTUCAS2
Terrain Tamer Upper Control Arm suitable for Ford Everest, Ford Ranger PX I II and Mazda BT50 TTUCAS2
Pair Upper control arms for raised suspension
Suitable for
Ford Ranger PX I II fitted with 3.2 Litre P5AT Turbo Diesel, 2.2 Litre P4AT Turbo Diesel engine, Built from 2011-2018
Mazda BT-50 UP UR fitted with 2.2 Litre P4AT Turbo Diesel and 3.2 Litre P5AT Turbo Diesel Engine, built from 2012-Onwards
Ford Everest UA fitted with 2.0 litre YNWS and 3.2 Litre P5AT Twin Turbo Diesel Engine, built from 2015-Onwards
Complete pair of fixed offset alignment upper control arms
Wheel alignment will need to be carried out after fitment
Modern IFS Four wheel drives are lacking in their adjustment range which becomes a greater issue when the vehicle is raised causing camber and castor issues.
Raised IFS vehicles will effect ball joint articulation and clearance issues to the coil over strut at ride and droop height.
The Terrain Tamer offset upper control arms are a complete solution for any vehicle that has been raised between 25mm and 70mm providing an increase between +2.5 and +3.5 degrees of castor while also providing up to 1.5 degrees of negative camber lift giving a greater clearance to the coil over strut and more articulation of the upper control arm due to the maintenance free Pro bushing.
Improves the camber and caster adjustment range, allowing for an accurate steering wheel alignment after fitment
Features
-Alters/Optimises camber alignment to reduce body roll, distortion and tyre roll when cornering.
-Alters/Optimises castor alignment to increase tyre contact patch during roll, improve turn-in response and increases directional stability.
-Terrain Tamer Pro Bush technology gives resistance to grease, oil, ozone and weathering.
-The PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
-Articulation voids in bushing allow for suspension articulation and/or compression under loads.
-Protective tough powder coating and plating allowing for the toughest conditions and resisting corrosion.
-Terrain Tamer upper control arms are covered by a 3year/60,000kms warranty
ITEM SPECIFICS
| Brand: | Terrain Tamer |
| Manufacturer Part Number: | TTUCAS2 |
| Our Part Number: | NGTTUCAS2 |
| Condition: | New |
ADDITIONAL INFORMATION
- All Four x 4 Spares are an independent supplier of aftermarket, original equipment, and genuine parts. We are in no way related to genuine or original part manufacturers, distributors, or dealers. The warranty of any OEM genuine part is solely provided by All Four x 4 Spares
- This is an aftermarket product. Equivalent original equipment part number(s) are provided for reference purposes only.
All Four x 4 Spares will always undertake to provide adequate packaging to prevent damage to products during shipping. Our responsibility for any damage to freight ends when order has left our premises. We will consider replacement of damaged product however judgement will be at our discretion. If damage has occurred during shipping it would be advised to notify us and relevant courier.
- All exchanges / credits / refunds must be returned in saleable condition with packaging, accompanied by the original invoice for proof of purchase.
- All USED mechanical parts sold carry a 3 Month parts only warranty unless otherwise specified.
- All NEW mechanical parts sold carry a 12 Month / Unlimited kilometre parts only warranty unless otherwise specified.
- All electrical parts or components sold carry a 30 Day parts only warranty unless otherwise specified.
- All Four x 4 Warranty does not cover - Labour expenses, freight or towing costs, oil leaks, broken gears, consequential damage, loss of income or any other loss or expense.
- All Four x 4 will not be liable for any repairs or work carried out, without prior approval from All Four x 4.
- Warranty is void if parts have been tampered with, modified or dismantled.
- Goods cannot be returned if they have been specially ordered or vehicle cut section.
- Goods not required must be returned within 14 Days of invoice date at purchaser’s expense. Goods will be accepted only at the Management’s discretion. If accepted for return, such goods will be subject to a 15% handling charge.
- Good will not be accepted for return if they have been fitted, unless proven faulty.
- Warranty is void for components used in performance / modified vehicles or parts / competition / off road / race applications.
- All fitment information is for vehicles released in Australia, unless specified otherwise.