Oricom UHF380 5 Watt UHF CB Radio with Remote Control Speaker Mic
The UHF380 CB radio is operated by the controls on the hand held mic.
It allows you to instal the main box out of the way and still have full functions available.
Specifications:
Compliance
|
AS/NZS 4365:2011
|
Frequency Range TX
|
476.425 - 477.4125 MHz
|
Frequency Range RX
|
400 - 512MHz
|
Number of TX/RX Channels
|
80 UHF CB
|
Number of user programmable RX only Channels
|
200
|
Channel Spacing TX/RX
|
12.5KHz
|
Wide Band Scanner
|
400~512, 400~420, 420~450, 450~470, 470~512 MHz
|
Operating modes
|
Simplex, Repeater TX offset (+750kHz)
|
Selcall ID
|
5 Digit with alpha display
|
Scanning Speed
|
130 msec per channel
|
Antenna Impeadance
|
50 Ohms
|
Operating Volts nominal
|
13.8 VDC
|
Operating Volts Range
|
10 to 15 VDC
|
Over Voltage Protection
|
Diode and voltage regulator
|
Over Current Protection
|
2 Amp fuse
|
Reverse Polarity Protection
|
Shunt diode
|
Frequency Stability
|
+/- 5ppm
|
Transmitter
|
|
RF Output Power
|
Nominal 5watts
|
Modulation
|
F3E (FM)
|
Maximum Deviation
|
2.5kHz
|
Spurious Emissions
|
< -30 dBm
|
TX Audio pre-emphasis
|
+ 6dB/octave from 300Hz to 3kHz
|
Current Consumption during TX
|
1.6 Amps with 50 Ohm antenna termination
|
Reciever
|
|
Circuit Type
|
Dual conversion superheterodyne
|
IF Frequencies
|
1st IF = 21.4MHz , 2nd IF = 450kHz
|
Current Consumption during RX
|
200mA
|
Sensitivity
|
< -123dBm at 12dB SINAD
|
Sensitivity Receive only channels
|
< -110dBm for 12dB SINAD
|
Selectivity
|
+/-3.75kHz min @ 3dB to +/-15kHz max @ 40dB
|
Intermodulation Immunity
|
> 70dB
|
Spurious Immunity
|
> 70dB
|
Audio Output Power
|
3 Watts Maximum
|
RX Audio de-emphasis
|
-6dB/octave 300Hz to 3kHz
|
Audio frequency response
|
300Hz to 3kHz
|
External speaker jacks
|
One on transceiver one on head unit for optional 8 Ohm mono speaker (3.5mm jack.)
|
Transciever
|
|
Dimensions
|
135 (d) x 110 (w) x 29 (h) mm
|
Weight
|
420g
|
ITEM SPECIFICS
Brand: | Oricom |
Manufacturer Part Number: | UHF380 |
Our Part Number: | NGUHF380 |
Condition: | New |
Ask a question about this item
All Four x 4 Spares will always undertake to provide adequate packaging to prevent damage to products during shipping. Our responsibility for any damage to freight ends when order has left our premises. We will consider replacement of damaged product however judgement will be at our discretion. If damage has occurred during shipping it would be advised to notify us and relevant courier.
- All exchanges / credits / refunds must be returned in saleable condition with packaging, accompanied by the original invoice for proof of purchase.
- All USED mechanical parts sold carry a 3 Month parts only warranty unless otherwise specified.
- All NEW mechanical parts sold carry a 12 Month / Unlimited kilometre parts only warranty unless otherwise specified.
- All electrical parts or components sold carry a 30 Day parts only warranty unless otherwise specified.
- All Four x 4 Warranty does not cover - Labour expenses, freight or towing costs, oil leaks, broken gears, consequential damage, loss of income or any other loss or expense.
- All Four x 4 will not be liable for any repairs or work carried out, without prior approval from All Four x 4.
- Warranty is void if parts have been tampered with, modified or dismantled.
- Goods cannot be returned if they have been specially ordered or vehicle cut section.
- Goods not required must be returned within 14 Days of invoice date at purchaser’s expense. Goods will be accepted only at the Management’s discretion. If accepted for return, such goods will be subject to a 15% handling charge.
- Good will not be accepted for return if they have been fitted, unless proven faulty.
- Warranty is void for components used in performance / modified vehicles or parts / competition / off road / race applications.
- All fitment information is for vehicles released in Australia, unless specified otherwise.