Oricom Value Pack - Micro UHF CB Radio DTX4300 + 6.5dBi 880mm Antenna ANU220 - DTX4300VP
This is a new quality Oricom branded UHF CB Radio Value Pack.
The DTX Series of UHF CB Radios are the first and best of their breed and have become an essential communication tool for on and off the road. The Oricom DTX4300 Micro Size 5-Watt UHF CB radio is a well-crafted unit, packing a real punch for its ultra-compact size, and is one of the smallest fixed mount UHF CB radios on the Australian market. This pack includes the DTX4300 5 Watt UHF CB Radio and the all rounder ANU220 6.5dBi UHF CB Antenna.
Features & Benefits:
DTX4300 Key Features:
- Ultra compact micro size
- 96 colour LCD backlit display
- Flip LCD function
- Over voltage alert function
- Heavy duty microphone
- 3 memory groups
- Smart fast scanning (priority/group memory/group tone scan)
- Back light brightness (4 pre-set levels plus auto)
- Rotary volume/channel and squelch control
- Duplex
- 38 CTCSS & DCS codes
- Diecast metal chassis
- Auto power off (off/1h/2h/4h)
- 3.5mm external jack (for optional external speaker)
- Designed and engineered in Korea
ANU220 Key Features:
- Heavy duty barrel spring
- Offers a variety of mounting options
- Finished in black powder coating
- Length of antenna is 880mm (including spring base)
- Includes 4.2m coaxial cable
Warranty:
ANU220 Antenna - 3 Year Warranty
Frequently Asked Questions
What are the wiring configurations for connecting to the vehicles power supply?
- Radio stays ON when the ignition is switched OFF:
Connect the radio’s negative (black) lead to the vehicle chassis, or directly to the battery’s negative terminal. Connect the radio’s positive (red) lead via the 2 Amp fuse to the battery’s positive terminal. Alternatively, the positive lead could be connected at the fuse box at a point that has DC Power continuously available (preferably the battery side of the ignition switch) via the 2 Amp fuse. - Radio turns OFF with the ignition switch:
Connect the radio’s negative (black) lead to the vehicle’s chassis, or directly to the battery’s negative terminal. The radio’s positive (red) lead should connect to an accessory point in the vehicle’s fuse box via the 2 Amp fuse.
How do I turn the unit on?
Press and hold the Channel selector.
How do I set the volume level?
Turn the channel selector clockwise to adjust the sound level for comfortable reception. On the microphone push the up or down buttons to increase or decrease the volume. If held down the volume will increase or decrease quickly.
How do I select a channel?
Press channel selector once. “CH” will appear on the LCD. Select the channel by rotating the channel knob.
On the microphone push the mode button and select the channel using the up or down buttons.
What is the PTT?
PTT refers to Push To Talk. Pressing the PTT button activates the transmitter. The RF (radio frequency) level will appear on the LCD as you are transmitting. To receive, release the PTT button and then TX will disappear on the display. When transmitting, hold the Mic two inches from your mouth and speak clearly in a normal voice across the front of the Mic area.
How do I factory reset this radio?
Turn radio on while pressing the ANT button. There are two reset levels All Reset “AL reset” and All except the user programmed memories “User reset”. The reset type can select in menu mode. “All reset” will clear all memory and settings back to the factory default settings. “User reset” will clear all settings except user programmed memory channels they will be preserved.
How do I flip the LCD display?
Rotate channel selector to select filp direction vv or nn.
Is this radio suitable for use outside of Australia?
All Oricom products are approved for use in Australia and NZ only, and although they will still work in other countries, they may not meet that countries requirement’s for voltage, operating frequencies or power RF levels and if used may interfere with other services which could attract penalties from the local administration authorities.
Specifications:
DTX4300 Technical Specification
| Compliance | AS/NZS 4365:2011 |
| Frequency Range TX/RX | 476.425 - 477.4125 MHz |
| Number of TX/RX Channels | 80 UHF CB Channels (75 voice) |
| Channel Spacing TX/RX | 12.5KHz |
| Operating modes | Simplex, Repeater TX offset (+750KHz) |
| Scanning Speed | 50 msec per channel |
| Antenna Impedance | 50 Ohms |
| Operating Volts nominal | 13.8VDC |
| Operating Volts Range | 10 to 16 VDC |
| Over Voltage Protection | Diode and Voltage regulator system |
| Over Current Protection | 2 AMP fuse |
| Reverse Polarity Protection | Shunt diode |
| Frequency stability | +/- 5 ppm |
| Dimensions (H) X (W) X (D) | 22.5 x 100 x 76mm |
| Weight | 210g transceiver only |
Click Here to View Specifications
Click Here to View Quick Start Guide
Click Here to View User Guide
Click Here to View Fitting Guide
ITEM SPECIFICS
| Brand: | Oricom |
| Manufacturer Part Number: | DTX4300VP |
| Our Part Number: | NGDTX4300VP |
| Cross-Reference Numbers: | DTX4300, ANU220 |
| Condition: | New |
Ask a question about this item
All Four x 4 Spares will always undertake to provide adequate packaging to prevent damage to products during shipping. Our responsibility for any damage to freight ends when order has left our premises. We will consider replacement of damaged product however judgement will be at our discretion. If damage has occurred during shipping it would be advised to notify us and relevant courier.
- All exchanges / credits / refunds must be returned in saleable condition with packaging, accompanied by the original invoice for proof of purchase.
- All USED mechanical parts sold carry a 3 Month parts only warranty unless otherwise specified.
- All NEW mechanical parts sold carry a 12 Month / Unlimited kilometre parts only warranty unless otherwise specified.
- All electrical parts or components sold carry a 30 Day parts only warranty unless otherwise specified.
- All Four x 4 Warranty does not cover - Labour expenses, freight or towing costs, oil leaks, broken gears, consequential damage, loss of income or any other loss or expense.
- All Four x 4 will not be liable for any repairs or work carried out, without prior approval from All Four x 4.
- Warranty is void if parts have been tampered with, modified or dismantled.
- Goods cannot be returned if they have been specially ordered or vehicle cut section.
- Goods not required must be returned within 14 Days of invoice date at purchaser’s expense. Goods will be accepted only at the Management’s discretion. If accepted for return, such goods will be subject to a 15% handling charge.
- Good will not be accepted for return if they have been fitted, unless proven faulty.
- Warranty is void for components used in performance / modified vehicles or parts / competition / off road / race applications.
- All fitment information is for vehicles released in Australia, unless specified otherwise.