Terrain Tamer Rear Wheel Bearing Kit suitable for Landcruiser 75 & 80 Series w/ Rear Disc Brakes
This is a new quality Terrain Tamer branded Rear Standard Duty Wheel Bearing Kit.
This kit is sufficient to replace one side (left or right) of the rear wheel bearings. Please order the required quantity.
Suitable for:
- Toyota Landcruiser 70/73/75 Series: PZJ70, PZJ73 & PZJ75, built from 01/1990 to 01/1995 runout.
- Toyota Landcruiser 70/73/75/77 Series: HZJ70, HZJ73, HZJ75 & HZJ77, built from 01/1990 to 08/1999 runout.
- Toyota Landcruiser 70/73/75 Series: FZJ70, FZJ73 & FZJ75, built from 08/1992 to 08/1999 runout.
- Toyota Landcruiser 80 Series: FJ80, FZJ80, HDJ80, HDJ81 & HZJ80, built from 01/1990 to 01/1998 runout.
NOTE: Only suitable for vehicles fitted with rear disc brakes.
This kit includes a 35mm axle seal which suits the axle installed from factory on early models. However, at some point prior to 1999, the axle outside diameter (OD) was changed from 35mm to 36mm. Some earlier vehicles may have also had a newer 36mm OD axle installed.
If you require a 36mm OD seal, please also add NG90310-36003 to your order.
Features & Benefits:
- Made in Japan: Every bearing and seal included in this package is manufactured in Japan to ensure exact tolerances, exceptional material quality, and superior reliability.
- Complete Replacement Package: Each kit contains all the required hub bearings, races, premium seals, snap rings, and necessary hardware for a complete wheel bearing replacement.
- Enhanced Handling Response: Replacing worn components restores factory steering precision and provides a significantly smoother ride on both sealed roads and off-road tracks.
- Prevents Tyre Wear: Maintaining proper hub alignment helps eliminate uneven tread wear, which ultimately extends the service life of your expensive 4x4 tyres.
- Superior Shock Absorption: Designed to cushion the high impact impacts of corrugated roads, deep ruts, and bumpy terrain to protect your vehicle and passengers.
- Optimal Seal Protection: The included high quality seals prevent water, mud, dust, and off-road debris from entering the hub assembly and degrading the bearing grease.
Premium 4x4 Wheel Bearing Replacement Kit built for Tough Australian Conditions
When you are heading out into remote bush tracks or tackling heavy corrugations, the reliability of your drivetrain is everything. A failing wheel hub assembly can cause severe damage, compromise handling, and leave you stranded far from home. This Terrain Tamer Standard Duty Wheel Bearing Kit offers a comprehensive solution for four wheel drive owners who demand reliability. Engineered to withstand the extreme forces of heavy towing and off-road touring, this kit will ensure your vehicle's structural integrity at the wheel assembly.
Heavy Duty Shock Absorption and Advanced Rolling Efficiency
Every bump and dip in the track places immense stress on your vehicle's axles. This replacement kit is specifically designed to keep your wheels rolling smoothly and evenly while effectively absorbing harsh road vibrations. Replacing your worn wheel bearing with the top tier components included in this kit will drastically reduce structural fatigue transferred to your suspension system, ensuring better vehicle handling response and safety for everyone inside the cabin.
Reduce Wear and Prevent Costly Maintenance
Neglecting your wheel hubs often leads to excessive tyre wear, reduced braking efficiency, and costly axle repairs down the line. Installing a premium 4x4 wheel bearing replacement package ensures that your hubs remain perfectly aligned and tightly packed. Regular maintenance with these Japanese made components will keep your drivetrain operating at peak efficiency, preventing dangerous heat buildup and grease breakdown during long distance highway drives or demanding low range off-road work.
ITEM SPECIFICS
| Brand: | Terrain Tamer |
| Manufacturer Part Number: | WBK3A |
| Our Part Number: | NGWBK3A |
| Supersedes Part Numbers: | WBK3 |
| Condition: | New |
ADDITIONAL INFORMATION
- All Four x 4 Spares are an independent supplier of aftermarket, original equipment, and genuine parts. We are in no way related to genuine or original part manufacturers, distributors, or dealers. The warranty of any OEM genuine part is solely provided by All Four x 4 Spares
- This is an aftermarket product. Equivalent original equipment part number(s) are provided for reference purposes only.
All Four x 4 Spares will always undertake to provide adequate packaging to prevent damage to products during shipping. Our responsibility for any damage to freight ends when order has left our premises. We will consider replacement of damaged product however judgement will be at our discretion. If damage has occurred during shipping it would be advised to notify us and relevant courier.
- All exchanges / credits / refunds must be returned in saleable condition with packaging, accompanied by the original invoice for proof of purchase.
- All USED mechanical parts sold carry a 3 Month parts only warranty unless otherwise specified.
- All NEW mechanical parts sold carry a 12 Month / Unlimited kilometre parts only warranty unless otherwise specified.
- All electrical parts or components sold carry a 30 Day parts only warranty unless otherwise specified.
- All Four x 4 Warranty does not cover - Labour expenses, freight or towing costs, oil leaks, broken gears, consequential damage, loss of income or any other loss or expense.
- All Four x 4 will not be liable for any repairs or work carried out, without prior approval from All Four x 4.
- Warranty is void if parts have been tampered with, modified or dismantled.
- Goods cannot be returned if they have been specially ordered or vehicle cut section.
- Goods not required must be returned within 14 Days of invoice date at purchaser’s expense. Goods will be accepted only at the Management’s discretion. If accepted for return, such goods will be subject to a 15% handling charge.
- Good will not be accepted for return if they have been fitted, unless proven faulty.
- Warranty is void for components used in performance / modified vehicles or parts / competition / off road / race applications.
- All fitment information is for vehicles released in Australia, unless specified otherwise.